mainers work too i thought vermont was easier my mistake...
get ahold of the dmv in vermont....they seem loose with titles and registrations for out of stateers. could end up with a vaild vermont plate and...
Get real striping paint you will have way better luck. Damhik
iI have one of those it works sweet. i do rims and vintage auto stripes on occasion.
I just bought one from the flaps it was less than ten bucks and was a name brand part.
https://www.boltdepot.com/fastener-information/Bolts/US-Recommended-Torque.aspx#:~:text=US%20Recommended%20Bolt%20Torque%20%20%20%20Size,%20%2064%2...
they clear the finned drums and just clear the track kick disc brackets and calipers. i had to tune the edge of the slotted part with a hammer to...
exhaust tends to self-clearance with vigorous driving...
what kind of springs did you get? if you remove the bump stops the axle may contact the frame or on a 304 powered jeep the oil filter/oil pump...
Spruce tip done well is really pretty.[img]
Funny the plug has three cut right off the blazer harness thanks I’ll use the brown one.
The 4.3 is a 95. I went a few rounds with the wiring in the blazer after the rebuild. Gave up on the blazer ripped the rebuilt 4.3 and slapped a...
I’m doing almost the same swap which terminal on the four pronged connector is the exite wire?
[img] [img] Here it is wrapped with a tshirt waiting for resin notice the offset in both directions as the engine sits offset just a touch. Didn’t...
I’m in the process of making a fiber glass one for the wife’s 76 with a 4.3 I’ll try to get some pics....
i run a gremlin cap...should i sell it to finance the gas?
i have family in buffalo and could perhaps help with getting them to at least western maine fryeburg aera
brennans garage has brackets that are super easy
Worn idler gear? Loose bearings or worn sliding gear? How is the oil looking?
they hate getting stuck just a little more
Separate names with a comma.