I got everything to add a rear tank from Barney's Jeep. Tank, hoses, sending unit, etc.
When I put my Flaming River column in, I used the original Jeep clamp at the bottom of the dash
I got one from Walck's, don't know if he still has them
PM on Harmonic Balancer
You may need to charge the battery since the engine is not running. With the key in the on position, you might want to take the wires off the...
Cut the locking ring out of you old tank. Get a néw 6 hole tank, cut the 6 hole mount out and weld the locking ring in.
Tires have 50 miles on them. Do not know about tire pressure. They were not I a hurry to get it done. Was at the shop for a while.
All the heater has is a 3 speed fan control switch.
I guess you could but the Force Fuel is powered though the EFI ECM. There is no fuel return line on the TB. Do not know if that matters.
If some one wants to PM a phone number I can text you a video of the engine running and you can post it here. At this time I do not know how to...
The engine does not hunt for idle, it seems smooth to me, at times, the idle will slow down, then it will pick back up. The idle does not rev...
I could not get a carburetor to work for me, bought a rebuilt one and it did not work. I rebuilt one and it did not work. Explored the EFI and...
Got the heater from Summit. Put power brakes on, this was the only place for the heater.
What little that I have drove it, I am very happy with it. The RPM on the handheld jumps around but it idles fine. Does nut rev up and down....
Here is the alignment sheet.
The shop was talking about a Cosmo Shim but did say they could not find them. Did not say anything about a eccentric .
Log into Facebook
As it was described to me. There is a shim that you put between the back of the spindle and the axle housing. The shim is thicker on one end which...
Looking for some Camber shims for a Dana 30
I thought the catch bottle was put in by Kaiser. Here are pictures of what I got.
Separate names with a comma.