1961 CJ5 with SBC and 400turbo. Rear driveshaft around 13”
We all have been waiting a long time to hear it run.
They make a tool for forming the eye in the cable.[ATTACH]
Someone on this forum purchased body molds from one of the manufactures. Haven’t heard much about them in a few years now.
There is ball valves that can be installed in the engine to shut off the coolant flow for the summer or if a leak occurs.
Ive replied in many posts that’s are similar to your issue. End play of your engine should be checked and recorded somewhere. Any time the...
I see at least one in the scrap yard each time there.
I may have missed it, did we have a video of that aluminum piece of jewelry run yet?
Physically it can occupy that space. Driveshaft length is a major concern especially with a D20. I have a turbo 400 with a D18 and my driveshaft...
Most of the panels on mine were bent over the front bumper with a bunch of clamps.
i feel your pain, bought a builder 30 two years ago and haven’t done anything but take it apart. Still driving the 27 with 11” brakes making wide...
Seemed counterintuitive at first but you explained it perfectly. Who would have thought that the same technology that makes sports cars carve...
The thought and install of this looks good and appears to work to allow the suspension to have a reasonable amount of articulation. The main...
I would say that was time well spent.
Something was pushing on the crankshaft. Could be the clutch adjustment or a pilot bushing that is too tight on the input shaft. This is why I...
Take your time. We’ll be waiting patiently.
I’ve never heard or believe it’s over torqued at the second click. Just a waste of time.
Pictures of what you have would help.
So the second switch is actually a battery disconnect ?
Separate names with a comma.