I tried using the OK 4WD inserts on my D30 but they were too small. I went the same route you did on your 44.
Here is what the inserts manufacturer says: https://ok4wd.com/rock-equipment-tie-rod-flip-kit
7/16” - 1” reamer
I do indeed have it back at my home. If I was heading that way I would drop it off but I won't be until late Feb. It will fit in a small flat...
I removed my front sway bar completely this weekend.
That's not good. Do you have manifolds you can try? It might make sense to go that route and at least give them a try.
Is there an underlying reason they are so hot? Or is it just because the exhaust is building up with nowhere else to go?
Way over my budget. I'm just going to leave it disconnected
Nice set up, but since I really haven't noticed a difference with it disconnected I am just going to remove it.
Hopefully I will be getting some funds for my bday and Christmas. I "need" to make a couple of modifications. On our Moab trip the transfer case...
I might have a list. I'll take a look later.
Great work, I don't have the time or energy you have!
Very nice, be patient you have to wait for the right buyer. Good luck
My son has an old 4 barrel intake in the rafters. Edelbrock performer RPM I could probably get you for a good price. Let me know and I can drag...
I had the same diff cover on my 71 and it held up very well to a lot of abuse over the years.
I like those. My wife decided to try a couple "breathable" t shirts for the windows for our upcoming trip next weekend to Moab. The plan is to...
:watch: Watching this thread and off to check my shock mounts. It has always been in California so hopefully no issues.
I rented a 2021 Yukon XL last week and the lane notification was driving me crazy.
That's what I did
When I first installed the D30 in my 71' it floated all over the place. I added a 5 degree shim and it cleared it right up.
Separate names with a comma.