Installed new new fuel tank fill hose today. The Crown hose seems to be good quality, the fit was perfect. Sure glad we can get reproductions for...
I picked mine up from Ace HW, in those expensive pull out tray bins, I think labeled GM door bumpers. Fit and look perfect.
I suggest you prepare to pull timing cover and check condition of chain, gears and alignment of timing marks on cam and crank gears.
Yes, compression. I put gauge in plug hole to validate on compression stroke.
Sounds like you’re making progress. Keep it simple and follow the 23 steps, it’s really not that complicated. It’s good that you validated that...
A couple reference links for more research
Good read on installing
HEI (again!) - Off-Road Forums & Discussion Groups...
Yours looks just like mine when I first installed. I took fan blade off and engine fired right up, did minor adjustment for timing. Then purchased...
Put the top on. Old Kayline still holding up.
Replaced 50 year old park light lenses
Just to get closure on this issue, here’s how I remedied the issue.
I purchased a 1” fan spacer from Oreillys (they have 1 and 2” spacers on wall...
Anyone know of a fan spacer to resolve the clearance issue between blades and vacuum advance? A 1” spacer should work. Hopefully something from...
Thanks, takes a lot of patience and the heat gun is your friend.
Applied decals today.
Ultra Scotch-Brite pad (grey) and black paint strip.
Wise decision to slow down and see what options you have for mounting the box, you only want to rebuild it once. Here's some reference photos from...
Forward progress, keep turning nuts and bolts. My personal mantra.
The hard part is done.
Thanks, that’s the switch I’m going go with, the Chevy truck mechanical one. I had seen that solution before on one of the Jeep forums, forgot...
Separate names with a comma.