Using a mirror I was able to see that the splines had engaged and the shaft slid at least in to the disc.
It is a 6:1 CJ T-18A that is replacing a T-14. I used a pilot bushing out of the clutch kit that I bought. It had 3 and I could have sworn it was...
Whoops I just noticed I didn't put this in the intermediate forum. Sorry guys
For some reason the CJ T18 I am trying to swap into my 73 CJ5 with a 258 is not fully sliding in. It seems to be stuck about 1/4 of an inch away...
What throwout bearing is everyone using? The T18 shaft is larger than my current T14. I have a jeep bellhousing and jeep T18a.
I did herculiner on my XJ and have no complaints
I think there was 13 mounts on my 73.
2 where the fenders meet the tub
4 in the front passenger area
2 above the rear tires
I have an inermediate windshield and it fit perfectly. I think they just make them with a little extra length.
Ok I added both the links to the first post
I tried to convert it to a png but it froze my AWFUL work computer :mad: It's a jpeg and it's readable now. I just need to find a free ftp program...
On monday I'll convert it to a big ole jpg and rehost it
I just decided to host it on my website now that I got it off my work computer. Here's a link:
Kinkos? Office Max?
Mainly just trying to figure out what width seat I can stuff in there. In my infinite wisdom I bought a wide tuffy box before I knew that I should...
Especially in poster size ;)
Just browsting the internet checking out some seat options and realized that I have no idea how big the stock seats are. And of course I have the...
Also it can be opened with volo view express, so if you don't have autocad, pick that up. I'm almost positive it's free.
I printed mine out to...
Just remembered that I had this.
EDIT: I threw the drawing up on my server
And here it is in...
Gets dented on things :/
I have some flexible rubber ones that fit perfectly. They're yours if you want them.
Separate names with a comma.