That's the same one I used on my 1970. It has the V-6 grill and bolted right in with no modifications. You will probably need to adapt it to a 4...
My titled 70 and build date of Oct 69 has them
yes.... With the YJ springs the rear end moves back just enough when it flexes and the wide tires won't stuff
I'm running 33x12.5......they tore up my rear fenders
I used the 11" backing plates and the drums off a 72 Dana 30 for the rear 44 in my jeep. I did change the wheel cylinders to the correct ones for...
Being the recipient to that motor and mod, I can testify that it works well.
I love everything about that JEEP!.....would get it running and drive it1
PXIBT100.2 Amplifier | KICKER®
This is what I used along with 2 sets of 5-1/4" marine speakers.
Mine looks exactly like that, and it's the original "heavy Duty" cooling fan.
the spring packs are usually 10 individual springs making the suspension very stiff on the earlier models.
Im going to see if I can find a shroud or plans to build one to see if it helps.
I know it's hot outside and temps are not that far off, that's...
I have the stock solid 5 blade heavy duty fan, 180 thermostat.
I'm working with a 225 V-6, with heavy cooling fan and no fan shroud, and new 3 core aluminum radiator.
OK....When I changed out my radiator I...
Tarry99 built my engine.
heads start about post #84.
I do notice what Mcruff stated above, it does idol smoother and pulls all the...
Is that the right fan for the 225? mine has 5 blades
i used some left over black vinyl from rear seat to make boot from
I had the same issues with the FloKooler pump, my temp would run at 200 when running down road at 55-60 but would drop to 170-180 while idling....
They have 2 versions. A short version and a long version. Make sure you order he long version, you wil still need to use a button head bolt on the...
After looking at my notes from Terry, the cam is only advanced 2 degrees.
Separate names with a comma.