I have the vinyl ones that I think I bought form 60CJ5.
i think that's you're best option. Use a "fuel proof" sealant.
Steve: Sounds like an "Idea" ;) . When I've got nothing else to do!R)
Not that bad--oil is cheap and easy:) .
Mike: Can I remove the lower king bearing cap without taking everything else apart and spray them?? I have a can of the Permates spray. Only...
Steve: Ditto here !:(
Erik: Yup, you got it. The little ball just drops down into the little hole and the spring just drops down into the big hole (IIRC).
Sparky: How true the article is. Just allows the engine to release more of it's potential, which is always a good thing.
Interesting. I know that GM Saginaw manual steering box grease will work also. haven't tried to get it at the FLAPS yet though.
My '68 has nothing also. Was thinking of a couple of strips of nylon or the like. Prolly find it at the local hardware store as window molding...
Try this thread: http://www.earlycj5.com/forums/showthread.php?t=29947
For all of us that live in AZ, a word of caution. I haven't driven my Jeep in 3 weeks--it's HOT here--120*!! I put the batt charger on it at...
Herobi: Yes, don't feel like a stranger. I've been to Amsterdam back in '73.
Yes, we do have LPG (Propane) here. We fuel our Bar-B-Que's with it.;) R)
On a serious note, I think I would start with the ignition.
Mike: Thanks for keeping that pic. I don't have it anymore. I remember a while back we had quite a detailed discussion about it.
J.C. Whitney sells leather shift boots that work fine. One in mine.
If you have a 4bbl manifold on the 225 probably would be best to replace with a 2 bbl manifold for the 2bbl Holly. If your manifold is the stock...
The good 'ol 2G will always work, but the Holly 2100 with a few mods is a good carb. Yes, you will need an adaptor.
Mark: Your first question, the answer is yes. Your second question is "I don't know". My '68 has the vac for the heater controls comming from a...
Re: V6 Cutting out at cruising speeds?
(Quote)not acceptable, it's still daylight here
slap that thing back together with the old gaskets and...
Check out this thread: http://www.earlycj5.com/forums/showthread.php?t=22073&highlight=225+motor+mounts
Separate names with a comma.