Ok I have a D30 for Bamm Bamm that I will need to regear.
Already have 2 D44s for it. One is a 4.27 the other a 5.38.
Both gear sets are...
Where can I find the big piece that covers the tranny tunnel?
The PO of Bamm Bamm did a number on mine.
:mad: Instead of bolting it in right...
OK in a moment of brain fade, which end goes to the shackle on mil wrap springs?
The open loop or the closed one?
I've seen them done both ways...
OK I'm stumped.
Are the manl. and power box mounts the same or different?
The parts Jeep mount I have is beyond saving.
I have all the other...
Been looking at these for awhile now.
Would make long trips nice.
Did a search and didn't turn up anything.
I'm looking for the ring gear spacer to use a #3 carrier with #4 gears on a D44.
IE Power Lock for...
Thinking of ditching the offset D44 and the axle I'm thinking on has wider spring pads.
Anyone have pics of outboard hangers?
Did a quick search and did not see any.
Is there a carb with elec choke that will go on the F head? :?
Bam Bam has a single stick 18 in now.
I have a twin stick 18 out of a M38 A1. Unsure what year.
Think I want to go with the twin stick, even...
OK need to see a close up of a M38 A1 grill.
To be more precise the headlight area. I need to see the trim ring area.
Who can post me one or...
OK so I know a few of you run the soft half doors on the 5.
Thinking I may run half doors and a bikini top most of the time on mine.
On the 5 are not most battery trays on the passenger side fire wall?
Mine is on the frame beside the rad right behind the grill.
I was putting...
Heres the problem, I got some seats from Dan ( thanks again) I can make the driver side work with the factory mount, just some slight add on of...
OK, I have 4.27s in now, but I have a 27 & a 44 with 5.38s.
the engine is a :hurrican: (134).
The front axle thats in it is a 27a the other...
Anyone running a Web on the :hurrican: ??
I'm leaning that way for mine, I've run Webbers on VWs and had good power upgrades with them.
Looking for the fender sticker JEEP. I see the Jeep ones all over.
I've looked some but dont see any listed anywhere.
Y'all know if or where...
I found some engine ID #s tonight.
1st on a 134 out of a m38a1 (?) RMD7749.
2nd on the f-head in my 5, may help unravel some of the mystery....
Who has the hook/latch that bolts to dash to hold the widow frame up?
Separate names with a comma.