12” may be 11”? From 70s CJ
I thought of sucking air but the leak is very small.
I did adjust the rears very recently. Had the same issue...
Brakes had been perfect for the first year I drove the Jeep. I do have a slow leak at the proportioning valve where the rears connect. I’ve let...
I used them for my front hoop on my Jeep. Fast, friendly And good quality.
I bought this rebuild kit for a Dana 20 TC with my T14 kit from Novak. The friend who did the transmission work said the TC looked perfect and...
That’s correct. Just not complete. Missing the all important cast aluminum triangle.
At 8mpg towing the Varg around for the US tour will hardly effect the mileage.
I finally got a replacement spring and installed over the weekend. 4WD .com really screw up by sending me the wrong spring then after I returned...
How much do 10 really big jeep tires cost?
These 5/16” cam locking handles/bolts should work great. No tools, pretty fast and clamps tight.
What goes into that 710 hole?
That’s exactly how my rack is built (I probably copied yours). How Much rattling?
A picture would be great if you can. No hurry
Tips? Stay out from directly under the weld.
It is a standard bolt (maybe fine thread) so just shawk it off if you cant get the nut off.
That was it. Sarcasm is never easy in writing.
My pressure switch story - Recently on the Colorado trip none of the old CJs showed brake lights...
The stud locks against the inside of the brake drum. If you push it in it spins. Try moving the bolt out to lock against the drum. (Maybe)
Ya got two weeks and you’re not working full time. Get-r-done.
Thanks Tim. I ordered these.
now we’re getting somewhere! The cam type would be quick and easy if it fit in there well.
Separate names with a comma.