Almost look like BMW2002 seats from the ‘70s
Mine are 2” DOM positioned/welded at the end of my full cage supports, just under body and only about a 1/2” extending beyond the body. Cage...
You’re right, too much calculation/over thinking.
Better to spend the time in garage finishing this project! (y)
Glen and Howard
The vehicle I’m working has some details as noted in my “signature”.
Unfortunately its about 3 hours to Glamis, or about the same...
Good point the circumference is constant fir a given tire!
True, but gives me an “idea” if someone provides their specific tire...
That would be perfect, thank you!
Don't have a requested air pressure - thinking someone running a set in this size would have worked out optimum for road (assuming a road and...
Anyone measured the actual Rolling radius of their 33 inch tire. ( if you use one)
Half tank gas, top, or other weight related items during...
I prefer the high temp metal with silicone like these adel style clamps
Adel High Temp Cushioned Mounting Clamps for AN Hose and Tubing
A little OT
Been thinking of a remote Canton filter (supposed to be better flow and more filtering).
Used one on my BMW and was happy with it....
The structures are all located pretty close to my old tub ( one exception is the Riser under the firewall on driver’s side - it is...
Bought a MD Juan M38A1 tub, blank slate all around without any mounting or firewall holes, accuracy from a distance is ok. This maps to my...
To mangle a movie quote:
“life was like a garage full of of Jeeps. You never know what you're gonna get“
apologies to Forrest
Made a custom crossmember similar to a stock one for my 62- don’t like the way it eats my ground clearance.
Has anyone used this style with a...
Raced for SCORE years ago, here are their rules. I am using 1.750” x .120” DOM with the windshield, middle and rear hoops all going to frame.
Is there an issue with the way the engine runs? Is it only the Controller that is an issue?
My second jeep while in high school was a USMC M38A1 that I bought at auction at Camp Pendleton. It had limited slips in both axles, lots of the...
I am using something very similar to these in my build, will try to find part number tonite
Separate names with a comma.