Prairie city in Folsom area. I want to go up to the Sierra here in a few weeks to take it through some nice trails. There is a few things that I...
Finally got to take her out for some good fun!!! We were out wheeling for about 5hours and everything went great!
.1/2 inch NPT pipe plugs from local auto parts store.
.84 blazer calipers and backing plate.
.brake pads, bolts, brake lines, rotors(78 cj) and...
I replaced the calipers with some off of a 84 blazer. They fit like a glove!!! Took it out today and love it!
^ Thanks guys! I thought it would be done by now but I ran into a problem... The bleeder screws on the caliper where rounded(I got the calipers...
Update: just about finished with disk brake conversion!!! Just need to bleed the brakes.
Perfect! thank you all very much. There is local jeep yard close to home so I'll go check.
I'm looking to purchase a rear bench seat for my 69 cj5 here in the near future. Where would you guys recommend I get one from?
Does the frame mounted MC need to be upgraded when doing the disc conversion?
Not sure wich is the vacuum line. Is this the vacuum line?
I had the timing set at 5° BTDC before and I would get a lot of back fire, it sounded like the engine wanted to die and would take a bit to start...
I am trying to figure out where to set the timing on my dauntless 225. I bought a timing gun and I have it set right where the red mark is on the...
Thanks guys! :cheers:
Here are some pics my brother in law took.
Thanks! That's the plan. I really need to work on getting the brakes adjusted or doing the disc break conversion because the 9" drums are just not...
Thank you all for all the help! Here is a vid of me playing with it yesterday for a bit. Man does that lock right locker make a difference!...
I decided to get a pertronix system on Monday and installed it today. Wow! The jeep fires right up and drives a bit better. I also got some 1.25"...
Separate names with a comma.