Took apart, cleaned all, still trouble, set points, and timing, still no fix?
It's give trouble 3 years, came off amc-6 . New solex ordered?
Thanks for input, coming off, and complete disassembly in progress!
Yes it was running great 1 night.
Then next day doing this?
I've had this...
Just started this from one day to next?
Idle was so bad, I had to turn up 2 turns just to run?
Air screw has little effect.
It actually causes a...
They make a V-max lifter that's adjustable with lash and has a super lube feature to keep lobe happy. I think I'll try them?
Can u run Rhodes hyd lifters on a solid cam?
Might be a option?
And I'm already used to the ticking!
I don't want to make the truck, unusable for farm work!
I do want it to be mostly a toy, not a trail rig.
I miss the thumping big cam, through 3in...
Tires are 32s.
Which voodoo would u use?
They got it on now .
No one their has used a cam that large, I may have to be the ginny pig?
I joined their forum several days back, still can't post?
Going with either my current cam, or a voodoo.
Rollers tooo much $.
Really like the look of the voodoo704?
Anyone run a 704?
Crashed my 401 gremlin,(500HPish) built 20 years ago. Engine going in my J10 pickup. Teck has changed a lot since build. I'm replacing my offey...
Recommend me a good floor ratchet shifter for a J10.
Or is their a 2 stick, 1 for trans, 1 for T-case that would work?
Np208 need any special attention ? Has bout 65K miles!
Mines a 727, with dana 44s, my concern was the T-case strength?
Crashed my 401 gremlin.
Thinking bout 401 in J10?
Don't wang to start breaking crap?
My 70 has a 1050 Napa (WIX) Horizontal, just like the schematic pic.
Thought it was add on, but it's what book at Napa called for?
1982, j10, pickup, hood only latched on first click. Hit 45mph, blows up, can't see a thing, it's 10pm and dark, nail brakes, slam hood, go home...
I had to mess with my dizzy clamp to get it so I could get 12-14BTDC range. Took some trial and error. Running bout 10btdc now. My carb is...
I vote idle it down, around 400 for setting carb, then play with air screw.
As stated above, I've ran a Saginaw (off any amc car, actually a GM box, early firebird rebuilds were available at most parts stores), for 5+years...
Separate names with a comma.