very snug fit on shaft, I was able to remove mine with a pry bar on each side, gingerly rocking back and forth until it worked it's way off the shaft.
cool video as well:driving:
Make sure all holes through the firewall are sealed, undercoat the front floorboards from the underside, make sure your shifers are sealed to the...
it says about $3600 for a cj5 tub, that's a good price. wish I had seen these before I spent 2 years restoring my tub... anyone wanna buy a newly...
there are several CJ7s around hampton roads for sale if you watch craigslist, they come up all of the time. some are done up nicely.
Real Jeeps are built not bought
I'd like to hear some of the stories that Jeep could tell
Dude... sorry to hear it.
with new parts you can get down to 1/2 inch or so of slack. check all of your tie rod ends for slack, you can get a replacement needle bearing...
Hah! great idea Patrick, winch inspection, everybody post a pic so we can see how your cable looksR)
nope, just wanna see what the winch looks like with all of the mods
Hey Patrick, please post a pic of it without the winch cover on
Um...dude, that was over 4 years ago:)
foam weather strip between the top and tub sealed on the outside with a coat of silicone calk
when I installed my T18, I used a gantry and dropped a cable through the floor opening to take the weight of the T18 while I moved it into place....
this looks very similar and at a really good price
that's odd, I came up with $18,122.34. I'll check again
1. get Jeep drivable and drive in as many conditions as can safely be done.
2. take note of the things that do not work well with the way you...
Still awaiting a ride in Chia, it will have an ejection seat, won't it???:rotflmao:
Separate names with a comma.