That’s what the worrying thing is. You never know when it’ll give out
Yes. I’ll throw some grease in there later
Yes but it did not present itself after taking the drum off
If it were to be a bad bearing how long would I be able to safely run it?
Me too. Or I’m just really missing something
Just an illusion
Yep. We spun it quite a bit and didn’t hear anything. The axle play is within the factory specifications
[ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH]
So I pulled the drums and found.............
Nothing. Other than is being a little dirty it looked fine. On the inside edge of the drum it...
That’s the plan tonight haha I’ve been super busy Lately
It’s a brand new cv driveshaft. How should I check it?
Put it up again to check for play and didn’t find any other than the little bit of fore and aft movement that you should have. There was a little...
Braking didn’t have any effect on the sound
What’s baffling me though is that when I put it in the air and spin the wheels they spin freely. It’s only when I put it on the ground it sounds...
You thinking something is stuck between the shoe and the drum?
Separate names with a comma.