That's when everyone jumps out to disassemble the jeep.
Might want to take the bare clean head, place it on bare clean block with a thin even layer of die, paint, or lapping compound. Evenly make short...
Sounds like a perfectly running CJ. (y)
Needs more Subaru.
Working for me, CJ has white wheels, buggy has black, Suzuki can't tell. Looks like a good time! :clap:
Ok here are some pictures to critique. Here's the current version of the welder i had before mine walked away. (Reason I'm not investing too much...
With good incentives a very dedicated person can lock 9s when they find religion. You don't adjust disks. and you don't have to see a physical...
Currently I have a conversation table from tach rpm to mph for speed... something is off inside my t-case. In 3rd direct for my setup per the...
X2 autometer is pretty close in appearance with orange needle, black background. I have there tach, oil pressure, and engine temp.
I'm impressed she kept it for 7 years. When I die my wife's likely to push my heep into the road with a lit match on the seat. Looks like they...
If that's hot rolled you might have a hard time getting paint to stick. Sandblasting?
And every time you adjust something you have to use a new color and paint the old lines over with a sharpie. To be honest my Carburetor screws...
Maybe even find ways to store parts in the warm house without being caught. :ninja: :madwife:
Parts availability and cost are why I went 4 wheel disk. caliper brackets are a lot cheaper and adjustment is pretty easy. It's a grind however...
Front 11s and rear 9 is better than all 9s. But you may consider front disk and put those 11s on the rear... (I hate eccentric 9s they never come...
He's got the wrong covers on front and back...
That's a bigger garage than my 2.5 story house! o_O
Jpet had one in bam bam on the 2a page. Basically the way it engages requires a portion of rotation for the pins to climb ramps so when it slacks...
Maybe consider Fiberglass and resin. Use the bowl as a form (coated with wax or bagged) then you can make some nice fillets and gradually neck...
I have a 4flat connection mid frame and had an 8' flat to flat extension along the frame to the tow bar. This way In theory I can plug in a tester...
Separate names with a comma.