We say that here too. :)
Cost a ton to replace all the missing GI parts. Better to look for a complete vehicle.
PTO output units are fairly easy to find. There are a number of variants, some are pricey some are not. (Jeep truck units look similar but will...
Is it just me? That jeep seems to be riding rather low.
The military set-up also has the advantage of an in-tank fuel filter.
That heater box and radiator cowl intake is not 1955. Nor is a 12 volt battery.
Pretty sure that is a later speedo also. Does it go to '8' or '9'?
Give me a day or three I might be able to get you a photo.
They are an interesting triangulated design of steel rods. Very cool engineering.
Prolaby a 12v I suppose, but I'll be interested to know for sure. I live near Concord BTW.
Six volt or twelve?
Oil frothing in the sump, when the oil is whipped by the crankshaft.
I hope it works out well.
Then maybe a crack at the threads?
I don't recall the details of this engine... but damaged gasket at pickup tube to block sucking air at higher rpm?
Only way I can think of is to leave the hood open.
These kinds of marks should be worn with the pride of actually using a classic vehicle.
Your milage sounds very normal to me, maybe even better than normal for an F-head.
About $500USD at the very most. Significant,...
Photo at post #24 here.
Making/improvising Special Tools
Ask him if he knows anyplace you can get some winter-weight blinker oil.
I made one, but I'm not "they." Works great.
M38A1 manual shows a tool very similar, but it is 11/16", for cylinder head bolts.
I've found I don't have the time or patience for stuff like POR.
But with good prep I'm a big fan of Rustoleum. Some of my quickie paint jobs...
One thing I've seen a lot is the weight and or check valve/ball from the YF accelerator pump passage is missing.
They get lost when someone is...
Separate names with a comma.