Last gasket like that I used, it required rtv to keep it from leaking.
I agree with the above, extractors cause headache. I’ve had better luck...
I’ve had a small drip coming from the oil cooler on the cucv for a few weeks now and it finally turned into a fine stream. Being the tightwad I...
I like the GPW. Early production too! should've been script.
Now you have to wait another couple weeks and the price has gone up....:D
Nothing wrong with 33’s
Waiting on that money tree to sprout ;)
I’m really liking my millermatic 35 so far. I got it and a spool of extension cord for $300. A new regulator, spool of wire and gun consumables...
T98/d18 are in. I’ll need to either buy or make some spacers for the transmission mount. The mounting ear is broken off the d18 so I think the d20...
I put the D25 under the front and started moving things around and pulled the t98/d18 from the cj5 frame. I modified the spring mount on the...
I miss gpw 60603 :(
Fixed the charging system on the cucv. Cut off the side steps. Looking into stuffing 37’s on it so I have some suspension homework to do.
Picked up 12x12 3/16 and 48x48 1/8.
I used the death wheel and air hammer after smashing my hand with the 3lb hammer.
Meh that'll buff right out. Doesn't look that bad actually. Power wire to coil and voila! trail beater. T90 might be wrecked.
Well everything made it except the engine mounts. It looks way better with the shorter shackles. Annnd work decided to send me to...
At first glance it reminded me of a toyota.
@Keys5a I was referring to the 700r4/4l60 being the same.
Biggest downside to a hood scoop is you can't fold the windshield down :n:
Not so much like a carbureted vehicle would likely cause right? The 3b is similar no?
They are essentially the same transmission. I might have one near me if you want measurements of the pan.
Separate names with a comma.