Yeah, the inline that I got from the commando and probably a 4.0 later.
I all ready have all the mounts swapped and the drive train in.
Just curious, why a T90 bell housing?
Sure if I can figure it out myself, I have gotten varying info from a couple different sites.
Novak says 7.4" of stick out, but measured from...
Well I'm half way there the input is all ready pulled.. I didn't even really consider that as an option but it makes sense.
Ill call around...
Unfortunately it doesn't matter now, the input shaft is 1 3/4" too long :( Truck version. Shame on me for buying in the dark and not bringing a...
So I have been waffling back and fourth about what to do with the clutch linkage. Move the bracket back? Build a spacer for the trans side?
DOH! I'm in my own little world lately..
Posted via Mobile Device
Here are some pics of a 63 that I recently sold that had an intermediate windshield frame on it. I didn't convert it so I cant tell yall exactly...
Your local auto parts store will sell a grease and wax remover in the paint section. Blow/wipe all the dust you can out of there and then use that...
From my build thread.
Thanks for the honorable mention, BKD.
LMK if you have any questions.
Ok back to work on this thing..
Still need to finish up a little welding on the firewall and build the spacer for the clutch linkage.
Nice job! Turned out good.
I think I have seen those at Jax in Fort Collins before..
Where in western CO are you?
Whats the bed on the trailer made out of? Aluminum?
Can you fit a glove box insert on the drivers side? or is the wiper motor/pump in the way?
Nice job, looks gud!
I just double checked Tim's assessment with my 1972 FSM and he is correct.
If it were CJ-6 the seventh VIN character would be R (4750 GVW) or V...
I can stop by and play with your new TIG, errr I mean give you some pointers on welding aluminum :D
Yep easy to hit 6 instead of 5 at the DMV.
Passing along some parts sources.
A friend of my fathers emailed this to us, not sure how many of you get Hemmings Motor News. This is from the...
Separate names with a comma.