That looks like a NACO Lic Lens for a Willys
Everyone puts NDTs on...but Firestone Champion Deluxe were the stock civilian tires that came on the trailers.
This is what the M151 used and the HUMVEE is similar as well. We also used the clevis style mounts on the Deuces when pulling trailers.
He had a lot of the earlier Hall Tail Lamp lens and even some NOS complete assemblies but none of the later like above.
If any one is going to...
I'm at the Spring Willys Reunion and a guy has a bunch of tail lamp and lens stuff, I look when he gets his tarps off the tables. What's the price...
What do these look like and are they glass or plastic?
The M100 and M416 castings are not interchangeable.
Google "m38 brake line routing" and select images...there are lots of pictures on the web
I've worked with Ken aka oldtime to host and repost his BW T-98A 4 speed transmission information since the photos were on photobucket and folks...
This is my engine stand (OTC 1735)...I also took a larger piece of 1/4" thick box tubing to slide over the center tube to extend the two uprights...
Here is another:
I remember seeing large round magnets in the pans of GM transmissions back in the mid 80s...placing one on the D18 pan would be the same...
Might give Harry a try at Midwestwilly.com tell him Art sent you:D
The early CJ crank driven Koenig winch had a cage but mounted from the top of the roller fairlead to the back of the mount.
The image above does...
Wonder if you could use a steering ujoint
Ramsey 50 Winch M38 M38A1 Joint PTO G740 G758 | eBay
Actually production started in 45 using up the surplus Military T3 parts as is the case in the photo above with the 4 tie downs on the side and...
Herm has some Koenig Parts here
So you know the Willys Spicer 18 PTOs use the same shifter and Hermtheoverdrive.com has his own version of a reproduction shifter.
I've yet to find a T3-C trailer built after using up the left over T3 surplus parts tubs with an ACM number stamped. The tell tale sign has been,...
Separate names with a comma.