You won't find it....it was part of the original bushing...not sold separately.
Was the replacement cable the same overall length?
Should be around 58-1/4" long.
Maybe the hack bracket on the transfer case is to blame?
Wear would be visible on the plates.
And some slight end play movement in/out of the axles I would say is normal.
Damage can occur if previously a...
We all know that the factory books have been wrong, past and present.
My post above is in regards to ordering parts or anything special that would relate to the tags, way back when.\.
Of course, the factory records...
" Paint or Trim option 999 designates special paint or trim, therefore the vehicle serial number should be supplied".
No 221 trim code listed.
Yea if it's a quality cable, no lubrication required.
I still am using the factory Jeep cable I installed in 1983.
Yes, I carry a spare cable.
I think it's Barneys Jeep Parts that's reproducing the 72-75 column if you strike out for used.
Same model I still have on my Jeep, although for a 3A.
Well, I see photobucket ate my pics of my top in that thread.
Kayline "Luxair"model. Full zippered windows.
Cable stretching ?
Thanks Howard. I had looked and couldn't find any pictures..
The parts manual doesn't show the 1 piece set-up at all.
Siege69: the cable should...
Highly unlikely, unless someone has installed the Commando set-up into your CJ.
The CJ used a 1 piece clutch cable, from the clutch pedal to the...
Inner axle seal goes in the tube and seals on axle shaft.
Outer seal goes an the outside of the backing plate and seals on the wheel hub.
Me, I would rebuild/go thru it. That way I know what shape it's in.
Otherwise, it's roll of the dice.
Do you feel lucky ?
If it happened a great distance from home, trip to u-haul for a trailer.
Trailers are pretty cheap it you have to tow something to California....
You have to have "flex" somewhere in the steering shaft system.
Don't go all solid, you'll create problems.
I was able to buy a set for my D44 off set flanged from Pro Comp.
These are different than the D44 centered so measure carefully.
It MAY have been...
Maybe these charts from the Jeep parts book can help with width and dimensions for factory application.
For your 72 CJ5,
Use model 83/84 S6/V8...
Why fix something that isn't broke ?
Pull them out at 10k and inspect.
If okay stick them back in.
Separate names with a comma.