1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Motor mounts for a pontiac 151 please...

Discussion in 'Builds and Fabricators Forum' started by foreman, Jul 4, 2011.

  1. Jul 4, 2011
    foreman

    foreman Deere Tech

    Western Iowa
    Joined:
    May 8, 2010
    Messages:
    114
    I finally found direction for my 60, I found a motor, (151), out of a 80ish cj5 and have the adapter and such to mount up to the t90 and d18 and long story short am looking for aftermarket motor mounts for the 151. I saw the same motor with the mounts I want in a picture in a thread here, but am unable to find the thread. The mounts are the style that sit flat and the rubber cushion sits between it and the tabs welded onto the frame. The bolts run strait down and holds everything together. Was hoping someone knows what i am talking about, be even beter if the guy with jeep in the thread read this. thanks
     
  2. Jul 4, 2011
    jpflat2a

    jpflat2a what's that noise?

    Hermosa, SD
    Joined:
    Jul 30, 2003
    Messages:
    8,513
    sound like Novak or AA motor mounts....
     
  3. Jul 4, 2011
    foreman

    foreman Deere Tech

    Western Iowa
    Joined:
    May 8, 2010
    Messages:
    114
    I have been to both of there web sites and have not found anything for the 151 engine. The Jeep had a 350 sbc in it and I was lucky enough to buy a 64 cj5 in really good shape (Thanks Sparky), and I wanted to use that tube and not have to cut up it up so this 151 motor should fit the jeep much better, and it bolts right up where the 350 was. I may have to make my own if cannot locate what I want.
     
  4. Jul 5, 2011
    jpflat2a

    jpflat2a what's that noise?

    Hermosa, SD
    Joined:
    Jul 30, 2003
    Messages:
    8,513
  5. Jul 5, 2011
    SFaulken

    SFaulken Active Member

    Bellevue, WA
    Joined:
    May 24, 2011
    Messages:
    1,178
  6. Jul 5, 2011
    SIDSCJ

    SIDSCJ Jeep addict

    14th State
    Joined:
    Jun 25, 2004
    Messages:
    1,189
  7. Jul 5, 2011
    foreman

    foreman Deere Tech

    Western Iowa
    Joined:
    May 8, 2010
    Messages:
    114
    Thats the right style, I need to portion that bolts to the engine. They are different then what is on a sbc, they do not sit flat. They have a couple of different angles where they bolt to the motor. I will see if I can't get a picture. thanks.
     
  8. Jul 10, 2011
    Psychojeeper

    Psychojeeper Aint 'sposed to be pretty

    Las Cruces, New...
    Joined:
    Nov 15, 2005
    Messages:
    368
    SInce the GM 151 "Iron Duke" was factory in the early 80's CJ'sm wont the factory mounts work??
     
  9. Jul 11, 2011
    SIDSCJ

    SIDSCJ Jeep addict

    14th State
    Joined:
    Jun 25, 2004
    Messages:
    1,189
    Last edited: Jul 11, 2011
  10. Jul 11, 2011
    foreman

    foreman Deere Tech

    Western Iowa
    Joined:
    May 8, 2010
    Messages:
    114
    I think I am going to have to make or fab my own, I appreciate the leads though. Hope to get engine in this weekend without to much trouble.
     
  11. Jul 12, 2011
    foreman

    foreman Deere Tech

    Western Iowa
    Joined:
    May 8, 2010
    Messages:
    114
    I found the thread with the mounts I am looking for, the title is... f-head out iron duke in. the mounts are on the motor in the first picture. thanks
     
  12. Jul 17, 2011
    foreman

    foreman Deere Tech

    Western Iowa
    Joined:
    May 8, 2010
    Messages:
    114
    Well I went another way, I had a spare cross member for the transfer case so I bolted the transfer case to the engine and sat it in then stuck member under engine the angles were not quite right for the stock engine mounts and so I put the member in the press and bent it at its original bends until it had the correct angles, the member sits on top of the frame rails, but when flat... the member hits oil pan I will need to do some trimming and a bit more fab before welding in but it seems to be a good idea.
     
New Posts