1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Pertronix

Discussion in 'Early CJ5 and CJ6 Tech' started by dohc281, Apr 6, 2010.

  1. Apr 6, 2010
    dohc281

    dohc281 It is what it is.

    Laurel Springs, N.J.
    Joined:
    Dec 30, 2004
    Messages:
    605
    The second Pertronix for my Hurricane died, I like not having points but the thought of spending another $100.00 doesn't sit well with me, the second kit was replaced under warrenty but there isn't any warrenty this time. Just my $.02 cents worth.
     
  2. Apr 6, 2010
    Todd1973

    Todd1973 Jeep Resurrect er

    Lima,Ohio
    Joined:
    Mar 9, 2010
    Messages:
    124
    Can't go wrong with points. Just make sure you keep a spare set in the glove box in a zip loc bag.






    Todd
     
  3. Apr 6, 2010
    sparky

    sparky Sandgroper Staff Member Founder

    Perth, WA
    Joined:
    Sep 20, 2002
    Messages:
    9,221
    Seems odd that you'd have two go bad. That's not the most common experience with this part.
     
  4. Apr 6, 2010
    Eaallred

    Eaallred Member

    West Valley City, UT
    Joined:
    Oct 9, 2008
    Messages:
    188
    Does your coil have the internal ballast? If it doesn't it could be burning up the units.
     
  5. Apr 6, 2010
    Thunderpig

    Thunderpig Member

    Parachute, Colorado
    Joined:
    Mar 28, 2006
    Messages:
    259
    The following is a quote from me on this subject just a couple of days ago.

    When I did mine, I hooked it up and cranked it. It immediately blew the pertronix unit.. fried it. smelled smoke. No spark after initial key turn. It ended up being a brand new coil I just installed was bad and fried 3 pertronix units before I figured it out. I went back with the cheap plain NOS coil and the next new pertronix has worked like a charm since. Not saying that's the problem. Just wanted you to know what happened to me.

    I used a pertronix flame thrower coil that was supposed to be the real thing, but alas... it cost me about $250 bucks in the end.

    --------------------------------------------------------------------------------
    Last edited by Thunderpig; 04-02-2010 at 06:25 PM.
     
  6. Apr 6, 2010
    Red

    Red Member

    Mesa, AZ
    Joined:
    Apr 14, 2005
    Messages:
    128
    Stick with points, condenser, cap, rotor, & coil (well padded) in an ammo can under the passenger's seat (your tool box will hold four of em). we'll be the only ones driving in the event of a nuke strike.

    Well I've gotta go, busy day, gotta make a new tin foil hat and get back to work on my Y2K bunker, yeah, I procrastinate a bit.
     
  7. Apr 6, 2010
    w3srl

    w3srl All-around swell dude Staff Member

    Port Orange, FL
    Joined:
    Nov 6, 2002
    Messages:
    4,275
    FWIW Pertronix clearly specifies that you need 12 volts to the unit, not the reduced voltage from a ballast resistor.

    I learned the hard way that you can cook a Pertronix unit by leaving the key on without the engine running. :oops:

    Despite the issues that some folks have had with them, it's still on of the best mods you can make to an early Jeep.
     
  8. Apr 6, 2010
    Thunderpig

    Thunderpig Member

    Parachute, Colorado
    Joined:
    Mar 28, 2006
    Messages:
    259
    X2

    I've had problems setting up mine but I still agree! This is a great mod once you get it set up right!
     
  9. Apr 7, 2010
    dohc281

    dohc281 It is what it is.

    Laurel Springs, N.J.
    Joined:
    Dec 30, 2004
    Messages:
    605
    I parked the Jeep and the next time I tried to start it it wouldn't. It's got me beat.
     
  10. Apr 7, 2010
    Thunderpig

    Thunderpig Member

    Parachute, Colorado
    Joined:
    Mar 28, 2006
    Messages:
    259
    Ira,
    at this point I would suggest that you take a series of good pictures of your electronics set up and post them so we can take a look. Sometimes somebody else can pick up on something right off that was overlooked.

    Also I know your frustrated with it, but what coil are you using? Is it new, is it used or what. Have you changed the coil since the first burned up pertronix?


    And give us a detailed description of your problem.

    When you parked it, was it running then? And you go to start and it doesn't start. Does it fire? Crank over? Give us more details and don't give up... somebody will know just what to do.
     
New Posts