1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

dana 44 axle ?

Discussion in 'Early CJ5 and CJ6 Tech' started by napaguy, Jan 16, 2010.

  1. Jan 16, 2010
    napaguy

    napaguy Banned

    goldendale wa
    Joined:
    Sep 25, 2009
    Messages:
    441
    I have a 19 spline, dana 44 out of my 59 cj5...I finally got the axles out [what a pain!!!!!] and the threads on the end arent great but not that bad either...Am I going to be ok running a die down the threads and using a new nut? The threads look a little flat and one side has a single thread that is totally flat but the rest of the threads are good. What do you think? Thanks
     
  2. Jan 16, 2010
    Patrick

    Patrick Super Moderator Staff Member

    Los Alamos, NM
    Joined:
    Sep 22, 2002
    Messages:
    8,360
    Need a pic...
     
  3. Jan 16, 2010
    birddog56

    birddog56 Member

    Pennsylvania
    Joined:
    Feb 14, 2009
    Messages:
    163
    A pic would help but... run a die over them. Most of the stress is held by the taper.
     
New Posts