1948 jeep truck 1.9 L tdi

Been reading a lot on this motor (volkswagen 1.9L TDI) and its what I'm going to put in the truck I found this site and if I read it right they make the bell housing that would make this a bolt in almost but the company is in spain anybody know how to go about getting this stuff?
http://translate.google.com/transla...//www.deeptec4x4.com.br/default_produtos2.asp

 

heres some helpful info in this thread. good luck with it. i considered doing the same swap. keep us posted.
http://www.earlycj5.com/forums/showthread.php?t=62415

 

Thankz ******* for posting that.
I plan on posting this project for all to see and will listen to all the advice I can get.
I did send an email from that link I posted above to Spain and the guy wrote back that he do not say englsz I might have to call and have my brother who speaks Portuguese talk to them.
Looking at their site it looks like they make the bell housing that would work.

 

im correct in assuming that the bellhousing adapts the 1.9 to the stock t-90?

 

That's what I was trying to find out from them.
The way it reads makes me think it does. But If not I will build it

 

Hi Eddiem! I'll contact with them. But this shop isn't from in spain it is from Portugal.

Look for information here, as I see at pictures is very easy the adaptation http://www.overlanddiesel.com/Diesel_Conversion_Photos/Pages/Splinter_Project.html

 

Thank you! Xavi Those pics helped answer at least one of my questions.
I wondered if the vac pump on the back of the head could be removed to help clear the firewall and I see by the pics they took it off although I wanted to use it to run the wipers or even a brake booster but I see it makes for a good fit without it.
Looking at those pics it looks pretty easy.
Looking forward to see what you can find out
Thankz