1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

The Gold Project

Discussion in 'Builds and Fabricators Forum' started by neptco19, Jan 24, 2007.

Page 13 of 14
  1. Sep 28, 2008
    neptco19

    neptco19 That guy....

    Athens, GA
    Joined:
    Sep 26, 2003
    Messages:
    1,381
    fo shizzle..
     
    neptco19, Sep 28, 2008
    #241
  2. Sep 28, 2008
    Andy4802

    Andy4802 Canadian Jeep junkie

    Hudson, Qc, Canada
    Joined:
    Jul 30, 2006
    Messages:
    410
    what was the donor of the new rearend?
     
    Andy4802, Sep 28, 2008
    #242
  3. Sep 29, 2008
    NoFlyZone

    NoFlyZone Member

    Ridgeville, SC
    Joined:
    Mar 17, 2006
    Messages:
    578
    53"? thats CJ narrow track width.
     
    NoFlyZone, Sep 29, 2008
    #243
  4. Sep 29, 2008
    neptco19

    neptco19 That guy....

    Athens, GA
    Joined:
    Sep 26, 2003
    Messages:
    1,381
    Not sure what the new axle came out of, the guy I got it from had it laying in his field beside a bunch of other junk... Those measurements are from the axle flange to flange.
     
    neptco19, Sep 29, 2008
    #244
  5. Sep 29, 2008
    jeepaholic

    jeepaholic Jeepfreak81's fabricator!

    Saint Johns MI
    Joined:
    Aug 26, 2006
    Messages:
    79
    wide track J-truck
     
    jeepaholic, Sep 29, 2008
    #245
  6. Sep 29, 2008
    neptco19

    neptco19 That guy....

    Athens, GA
    Joined:
    Sep 26, 2003
    Messages:
    1,381
    Thanks, that will come in handy when Im looking for spare axle shafts :)
     
    neptco19, Sep 29, 2008
    #246
  7. Nov 22, 2008
    neptco19

    neptco19 That guy....

    Athens, GA
    Joined:
    Sep 26, 2003
    Messages:
    1,381
    Alrighty so here is engine #4 (had to go back through the thread and count :( )that is going in....one in it now smokes too much for my likin... This ones not much to look at right now, need to clean it up...but I actually got reciepts on this one being built and drove it before pulling so I know this one is good :)

    [​IMG]
     
    neptco19, Nov 22, 2008
    #247
  8. Nov 23, 2008
    joel63cj5

    joel63cj5 loose change

    manchester tn
    Joined:
    Sep 1, 2008
    Messages:
    67
    With one rock poking in your back.
    monkeys
     
    joel63cj5, Nov 23, 2008
    #248
  9. Jan 5, 2009
    neptco19

    neptco19 That guy....

    Athens, GA
    Joined:
    Sep 26, 2003
    Messages:
    1,381
    Got some new gauges installed...need to find the right ohm fuel gauge to replace the one stock gauge left

    [​IMG]

    Engine no. 4 installed...I even cleaned and painted up all ugly like :)

    [​IMG]
     
    neptco19, Jan 5, 2009
    #249
  10. Jan 11, 2009
    neptco19

    neptco19 That guy....

    Athens, GA
    Joined:
    Sep 26, 2003
    Messages:
    1,381
    Replaced the bent tie rod

    [​IMG]

    Some new seat covers to protect it while its stored outside

    [​IMG]
     
    Last edited: Jan 11, 2009
    neptco19, Jan 11, 2009
    #250
  11. Jan 11, 2009
    neptco19

    neptco19 That guy....

    Athens, GA
    Joined:
    Sep 26, 2003
    Messages:
    1,381
    [youtube]<object width="445" height="364"><param name="movie" value="http://www.youtube.com/v/RRCbybZmxvs&hl=en&fs=1&color1=0x5d1719&color2=0xcd311b&border=1"></param><param name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="http://www.youtube.com/v/RRCbybZmxvs&hl=en&fs=1&color1=0x5d1719&color2=0xcd311b&border=1" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="445" height="364"></embed></object>[/youtube]
     
    neptco19, Jan 11, 2009
    #251
  12. Jan 11, 2009
    jayhawkclint

    jayhawkclint ΜΟΛΩΝ ΛΑΒΕ

    Oklahoma City, USA
    Joined:
    May 18, 2006
    Messages:
    2,622
    Man, here's to better luck with the latest transplant. :beer:
    Posted via Mobile Device
     
    jayhawkclint, Jan 11, 2009
    #252
  13. Jan 11, 2009
    cj5 buggy

    cj5 buggy Member

    hardeeville, SC
    Joined:
    Dec 12, 2003
    Messages:
    403
    looking and sounding great
     
    cj5 buggy, Jan 11, 2009
    #253
  14. Jan 24, 2009
    neptco19

    neptco19 That guy....

    Athens, GA
    Joined:
    Sep 26, 2003
    Messages:
    1,381
    Got some more stuff done today...

    grab bar on the pass side

    [​IMG]

    [​IMG]

    Old Tailgate

    [​IMG]

    New Tailgate

    [​IMG]

    Cage Tie In

    [​IMG]
     
    neptco19, Jan 24, 2009
    #254
  15. Jan 24, 2009
    DanStew

    DanStew Preowned Merkin salesman Staff Member

    Lexington, South...
    Joined:
    Sep 22, 2002
    Messages:
    4,585
    You know Jason, i think you need to buy that m170 frame on the GA forum. Then stretch your rig. It is time to supersize goldie.
     
    DanStew, Jan 24, 2009
    #255
  16. Jan 24, 2009
    neptco19

    neptco19 That guy....

    Athens, GA
    Joined:
    Sep 26, 2003
    Messages:
    1,381
    lalalalalalala I cant hear you....I dont need any more "big" projects for a while. :beer:
     
    neptco19, Jan 24, 2009
    #256
  17. Jan 24, 2009
    DanStew

    DanStew Preowned Merkin salesman Staff Member

    Lexington, South...
    Joined:
    Sep 22, 2002
    Messages:
    4,585
    You know it has been on there for a while and he is itching to get rid of it :) Its on a frame with axles. ;) :)
     
    DanStew, Jan 24, 2009
    #257
  18. Jan 24, 2009
    cj5 buggy

    cj5 buggy Member

    hardeeville, SC
    Joined:
    Dec 12, 2003
    Messages:
    403
    nice Jason...
     
    cj5 buggy, Jan 24, 2009
    #258
  19. Jan 24, 2009
    bkd

    bkd Moderator Supreme Staff Member 2022 Sponsor

    K-Town Tenn.
    Joined:
    Apr 29, 2007
    Messages:
    3,294
    great looking welds on that grab bar, ....I need to do tie ins on my cage as well...looks great :beer:
    Jim S.
     
    bkd, Jan 24, 2009
    #259
  20. Feb 3, 2009
    neptco19

    neptco19 That guy....

    Athens, GA
    Joined:
    Sep 26, 2003
    Messages:
    1,381
    Made a little rack in the back behind the radiator to keep a cooler and toolbox on. Just need to find a piece of expanded and bolt it on then paint it all. The battery is mounted underneath it with a little room for another small box. Just ignore my fancy overflow bottle :D

    [​IMG]
     
    neptco19, Feb 3, 2009
    #260
Page 13 of 14
New Posts