1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

sm420 question

Discussion in 'Early CJ5 and CJ6 Tech' started by Huntman, Nov 19, 2007.

  1. Nov 19, 2007
    Huntman

    Huntman HIGH ROLLER

    Apex, NC
    Joined:
    Jan 19, 2007
    Messages:
    271
    Will a 420 bolt up to my bellhousing w/o the use of adapters? i currentlyhave a t14 to a 225.
     
  2. Nov 19, 2007
    Posimoto

    Posimoto Hopeless JEEP Addict

    Minden, Nevada
    Joined:
    Aug 7, 2003
    Messages:
    4,538
    I believe it will. My business partner put one in his '70 w/225 and I'm pretty certain the only adapter was to the Model 18 T-case. I know for a fact that he didn't haveto replace the input shaft, because he didn't take apart the tranny before he put it in. If you use the adapter that utilizes the "spud shaft" you don't have to do anything to the tranny. Novak Conversions has the shortest adapter plate. They have detailed info on how to do the conversion as well.

    http://www.novak-adapt.com/
     
    Last edited: Nov 19, 2007
  3. Nov 19, 2007
    nickmil

    nickmil In mothballs.

    Happy Valley, OR
    Joined:
    Sep 23, 2002
    Messages:
    12,529
    There's two bellhousings for the T-14/225 combination. One, used in '71 had the adapter between the bellhousing and the transmission cast as part of the bellhousing. The others had a removable adapter. The ones with the removable adapter will bolt right to the SM-420, just remove the adapter. Correct depth, indexing hole, etc. If yours is the cast in version then you need the earlier bellhousing without the adapter. Follow Posimoto's link to Novak's web site. TONS of good info on there. Nickmil
     
  4. Nov 19, 2007
    jd7

    jd7 Sponsor

    Nacogdoches,Texas
    Joined:
    Mar 30, 2004
    Messages:
    1,745
    The T86 is the one that has the spacer cast into the bellhousing, right? If tht's the case the others have the removable spacer with the standard GM bolt pattern underneath, IIRC........
     
  5. Nov 19, 2007
    nickmil

    nickmil In mothballs.

    Happy Valley, OR
    Joined:
    Sep 23, 2002
    Messages:
    12,529
    No the T-14 (see above post;)) although a T-86 could be bolted to the one with the cast in adapter. T-14 was standard in '71 behind the V-6 and '71 was the year they used the one piece adapter and bellhousing. Nickmil
     
  6. Nov 19, 2007
    trickpatrick

    trickpatrick Done? LOL

    North Idaho USA
    Joined:
    Nov 29, 2006
    Messages:
    838
    I just took the 86 out of my commando and it has the seperate adaptor forsure.

    Sm 420 bolted right up except for a very small clearance issue between the top of trans and bellhousing.
    You just grind their a bit you will see when its going together.

    I ground the bell but would do the tranny instead if I did it again.
     
  7. Nov 19, 2007
    Huntman

    Huntman HIGH ROLLER

    Apex, NC
    Joined:
    Jan 19, 2007
    Messages:
    271
    my bell has no adapter that goes between the trans and the bell. no cast in adapter that i know of. the trans just mounts to the bell which is just like a standard bell nothing extra here. so do i need anything?
     
  8. Nov 19, 2007
    green71jeep

    green71jeep work in progress

    Riegelsville Pa
    Joined:
    Sep 6, 2005
    Messages:
    144
    .You wont be able to see the piece cast into the bell if there was a t-14 bolted to it with no cast iron adapter it is not going to work.
     
  9. Nov 19, 2007
    sparky

    sparky Sandgroper Staff Member Founder

    Perth, WA
    Joined:
    Sep 20, 2002
    Messages:
    9,221
    From : http://www.earlycj5.com/tech/trans/SM420/sm420_swap.php

     
  10. Nov 19, 2007
    Huntman

    Huntman HIGH ROLLER

    Apex, NC
    Joined:
    Jan 19, 2007
    Messages:
    271
    so i have to find another bellhousing?
     
  11. Nov 19, 2007
    nickmil

    nickmil In mothballs.

    Happy Valley, OR
    Joined:
    Sep 23, 2002
    Messages:
    12,529
    Yes.
     
  12. Nov 20, 2007
    Huntman

    Huntman HIGH ROLLER

    Apex, NC
    Joined:
    Jan 19, 2007
    Messages:
    271
    what years will work?
     
  13. Nov 20, 2007
    AKCJ

    AKCJ Active Member

    Fairbanks, Alaska
    Joined:
    Aug 12, 2003
    Messages:
    1,035
    I'm probably missing something here. On my 70 that had the t14 I was able to use the bell but it did require drilling out two holes to mate to the sm420. It's the original, one pc bell housing.

    Maybe the 71 is different? I'm just not following this.
     
  14. Nov 20, 2007
    nickmil

    nickmil In mothballs.

    Happy Valley, OR
    Joined:
    Sep 23, 2002
    Messages:
    12,529

    The '71 bellhousing had the adapter between the transmission and the bellhousing cast as part of the bellhousing which makes it too long for the SM-420 and most other transmissions as well. Your '70 should have had a removable adapter between the T-14 and bellhousing. In fact it had to have again because the T-14 Input shaft and front bearing retainer are too long to just use a normal stock style Buick V-6 Bellhousing.

    Regarding which bell to look for, any '70 and older CJ V-6 bellhousing will work as well as many Buick Car bellhousings. Watch out for where the release arm comes out of the bellhousing as the angle/location is different on some cars and if it has a starter pocket on both sides to fit BOPC, then the driver's starter pocket can interfere with stock Ross style steering. Nickmil
     
  15. Nov 24, 2007
    Mcruff

    Mcruff Earlycj5 Machinist

    Albertville, AL
    Joined:
    Sep 22, 2002
    Messages:
    5,349
    Here is a 71 model bellhousing with a t14 behind it. Notice there is no adapter for the trans. The adapter is cast into the bellhousing.
    [​IMG]
     
New Posts