1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

So now my headlights don't work...

Discussion in 'Early CJ5 and CJ6 Tech' started by StraightToPlaid, Mar 4, 2007.

  1. Mar 4, 2007
    StraightToPlaid

    StraightToPlaid Ludicrous speed!!!!

    West Chester, OH
    Joined:
    Nov 21, 2006
    Messages:
    338
    I was over at the gf's house late last night and I get in the CJ to leave. I pull the headlight switch and nothing happens. My sidemarkers and gauge lights kick on but the headlights don't. Ok... I try my high beams, they still work, so I drive home while thoroughly ****ing everybody and their brother off because I'm blinding them.

    Now when I was working on my brake lights yesterday a live wire touched the frame and shot off some sparks. Is there ANY way that this could have messed with my fuses or headlights? I figure either my wiring is messed up or my lights both blew because of that.

    Earlier in the day I did have an issue with coolant spraying everywhere, I forgot to tighten the upper radiator hose. When the thermostat opened up it got really messy really fast. Is there a chance I dumped alot of glycol into a connection so it's fouled up? These things worked the day before...
     
  2. Mar 4, 2007
    Patrick

    Patrick Super Moderator Staff Member

    Los Alamos, NM
    Joined:
    Sep 22, 2002
    Messages:
    8,360
    Dimmer switch.....
     
  3. Mar 4, 2007
    blevisay

    blevisay Oh Noooooooooooooooo! Staff Member

    Portland Tn.
    Joined:
    Sep 20, 2002
    Messages:
    4,350
    x2

    BTDT
     
  4. Mar 4, 2007
    StraightToPlaid

    StraightToPlaid Ludicrous speed!!!!

    West Chester, OH
    Joined:
    Nov 21, 2006
    Messages:
    338
    Forgive me for being an idiot, but this thing has a dimmer switch? I wish I had a user's manual :oops: Where can I find it.
     
  5. Mar 4, 2007
    Patrick

    Patrick Super Moderator Staff Member

    Los Alamos, NM
    Joined:
    Sep 22, 2002
    Messages:
    8,360
    High/ low beam switch.....
     
  6. Mar 4, 2007
    sparky

    sparky Sandgroper Staff Member Founder

    Perth, WA
    Joined:
    Sep 20, 2002
    Messages:
    9,221
    You used it to turn on your high beams, no?

    I don't know what else you would call the switch mounted on the floor, but I always called it a dimmer switch. :)
     
  7. Mar 4, 2007
    StraightToPlaid

    StraightToPlaid Ludicrous speed!!!!

    West Chester, OH
    Joined:
    Nov 21, 2006
    Messages:
    338
    Oh... so you guys think that switch is busted? Ok, I thought you were telling me I needed to hit some some switch. Now I do feel like an idiot :oops:
     
  8. Mar 4, 2007
    sparky

    sparky Sandgroper Staff Member Founder

    Perth, WA
    Joined:
    Sep 20, 2002
    Messages:
    9,221
    Replace the dimmer switch. R)

    BTDT.
     
  9. Mar 4, 2007
    StraightToPlaid

    StraightToPlaid Ludicrous speed!!!!

    West Chester, OH
    Joined:
    Nov 21, 2006
    Messages:
    338
    I'm going to check the connections first, a bunch of my wiring is getting bad connections from age. I'd prefer to just splice some wire or solder something up in the next day or two rather than wait for a part that I may not need.
     
  10. Mar 4, 2007
    sparky

    sparky Sandgroper Staff Member Founder

    Perth, WA
    Joined:
    Sep 20, 2002
    Messages:
    9,221
    Not like it's an uncommon item, or expensive, that and three of us here have experienced it's failure. ;)
     
  11. Mar 4, 2007
    Vanguard

    Vanguard Take Off! Staff Member

    Vista, CA USA
    Joined:
    Aug 30, 2006
    Messages:
    2,259
    Yep. Got one on the top of my toolbox. Was ~$7
     
  12. Mar 4, 2007
    ljspop

    ljspop Lurking Bronco Dude

    San Diego, CA
    Joined:
    Jan 29, 2003
    Messages:
    394
    Four of us here. :D
     
  13. Mar 4, 2007
    StraightToPlaid

    StraightToPlaid Ludicrous speed!!!!

    West Chester, OH
    Joined:
    Nov 21, 2006
    Messages:
    338
    I know, I looked up the replacement on Krage, it's $11 if I remember right. It's just that if I don't need it I won't buy it. There's a ton of $11 parts that I could use (including that water house Napa sold me on Saturday that didn't fit... It was wedged in there so tight I just chopped it off because that was easier than trying to slide it off) and they'll add up. I'm a college student, my funds are a bit limited...
     
  14. Mar 4, 2007
    w3srl

    w3srl All-around swell dude Staff Member

    Port Orange, FL
    Joined:
    Nov 6, 2002
    Messages:
    4,275
    X5.

    Try your FLAPS. ;)
     
New Posts