1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Looking for a Floor support

Discussion in 'Early CJ5 and CJ6 Tech' started by DRS50, Nov 16, 2006.

  1. Nov 16, 2006
    DRS50

    DRS50 New Member

    Joined:
    Oct 14, 2006
    Messages:
    35
    I have been trying to find the floor support that goes just in front of the rear floor step riser and at the back of the front floor and goes from one side of jeep to the other side and its bent to fit up inside the hump at the rear of the front floor.I have found the floor supports that go in the front of the front floor but not this one. Anyone have any ideas or have seen on a web site of someone who sells this peice? Thanks in Advance for any help.
     
  2. Nov 16, 2006
    Rondog

    Rondog just hangin' out

    Parker, CO
    Joined:
    Aug 25, 2005
    Messages:
    2,918
    Do searches here for Classic Enterprises and Jeep Panels Plus.
     
  3. Nov 16, 2006
    DRS50

    DRS50 New Member

    Joined:
    Oct 14, 2006
    Messages:
    35
    Thanks Ron, I will check jeep panels plus, I have gotten all the other panels we are going to replace from Classic Ent., but talked to Lamonte at Classic Ent. and he said they do not make that piece because they have not had a call for it.
     
  4. Nov 16, 2006
    scott milliner

    scott milliner Master Fabricator

    Seattle Wa.
    Joined:
    Dec 17, 2002
    Messages:
    2,362
    You mean you are looking for "C"? I got this part from Classic Enterprises. What they don't make it any more?:?

    [​IMG]
     
  5. Nov 16, 2006
    Rondog

    Rondog just hangin' out

    Parker, CO
    Joined:
    Aug 25, 2005
    Messages:
    2,918
    I think he's talking about something that's under "C" and the front floor pieces, on the bottom of the tub...like a hat channel, but I'm not sure. Is it in this photo?

    [​IMG]
     
  6. Nov 16, 2006
    captain cj

    captain cj Member

    Crystal Beach...
    Joined:
    Sep 27, 2005
    Messages:
    331
    I got my hat channel from Classic Ent. I cant believe they would stop making these as almost every jeep that gets redone needs them:?
    Edit except yours Ron they look to be in great shape
     
  7. Nov 16, 2006
    DRS50

    DRS50 New Member

    Joined:
    Oct 14, 2006
    Messages:
    35
    Yep it is it starts on the right side of the picture right at the yellow thing and goes across the jeep. its a channel looking piece spot welded to the floor. We have the parts A,C & G that classic makes and they are quality parts.
     
  8. Nov 16, 2006
    captain cj

    captain cj Member

    Crystal Beach...
    Joined:
    Sep 27, 2005
    Messages:
    331
    Im confused:?
     
  9. Nov 16, 2006
    Rondog

    Rondog just hangin' out

    Parker, CO
    Joined:
    Aug 25, 2005
    Messages:
    2,918
    Look at post #4, that looks like it's part of piece "G". Should be a left and a right, but I don't know about the center piece, where it goes up into "the hump".

    And yes, CaptainCJ, my tub is in shamefully good shape. It was only 19 years old when it was parked in the back of my dad's shop, and left to gather dust for 30 years.
     
  10. Nov 16, 2006
    captain cj

    captain cj Member

    Crystal Beach...
    Joined:
    Sep 27, 2005
    Messages:
    331
    I would think that the center piece up in the hump would be in good shape isnt that where all the oil and gear lube from the trans and transfer case gets slung?R)
     
  11. Nov 16, 2006
    DRS50

    DRS50 New Member

    Joined:
    Oct 14, 2006
    Messages:
    35
    Ok my bad, it is part of G, I didnt look at it right. You guys are not confuesed , I am. Sorry about that.
     
New Posts