1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

help with 350 swap, you guys got the info!!

Discussion in 'Early CJ5 and CJ6 Tech' started by Jeepster1970, Nov 5, 2006.

  1. Nov 5, 2006
    Jeepster1970

    Jeepster1970 Member

    Lincoln park, MI
    Joined:
    Jun 4, 2006
    Messages:
    55
    I need a few mesurements, basicly the flywheel disc surface to to where the throwout bearing rides, and a few other measurements to see if a 225 clutch and pressure plate will mount to a 350 buick, thanks. My number is 1 313 587 5672 if thats easyer.
     
    Jeepster1970, Nov 5, 2006
    #1
  2. Nov 5, 2006
    DRS50

    DRS50 New Member

    Joined:
    Oct 14, 2006
    Messages:
    35
    Read the Buick 350 Swap Problems in the Jeepster section, I believe it says somewhere that the 225 flywheel will bolt up but the 225 and 350 flywheels are balanced differantly.
     
    DRS50, Nov 5, 2006
    #2
  3. Nov 5, 2006
    Jeepster1970

    Jeepster1970 Member

    Lincoln park, MI
    Joined:
    Jun 4, 2006
    Messages:
    55
    I read everything i could find on the 350 swap and just couldn't get the answers i needed. I ended up swapping the longer gladiator t-15 back in, figure i'll modify whatever i have to from there.
     
    Jeepster1970, Nov 5, 2006
    #3
New Posts