1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Anyone Ever Used A Reproduction Speedo With Original Speedo Face

Discussion in 'Early CJ5 and CJ6 Tech' started by Paul Powell, Feb 26, 2023.

  1. Mar 2, 2023
    Backyard 65-CJ5

    Backyard 65-CJ5 I keep thinking it’s going to be an easy fix…

    Kentucky
    Joined:
    Dec 31, 2022
    Messages:
    63
    Definitely gone up about $125 since I bought it last year.

    I am interested to hear what Paul’s thoughts are now that we have thrown several options out there. If you opt for rebuilding the original speedo, please keep posting because I would love to see it.
     
  2. Mar 5, 2023
    Paul Powell

    Paul Powell New Member

    South Jordan, Utah
    Joined:
    Sep 15, 2022
    Messages:
    18
     
    Last edited: Mar 9, 2023
    vtxtasy likes this.
  3. Mar 6, 2023
    RMC1960

    RMC1960 New Member

    Fort Worth TX
    Joined:
    Dec 30, 2022
    Messages:
    10
    I have a similar question- I acquired a couple of speedometer heads and plan to swap the face and needle on my original for one in better shape- what are my options for re using or replacing the faceplate rivets? Also any suggestion on what to use to repaint the needle?
     
  4. Mar 7, 2023
    1969jeepercj5

    1969jeepercj5 Member

    Roseburg Oregon
    Joined:
    Apr 22, 2016
    Messages:
    86
    As stated above, the old face doesn't line up with the odometer read out. Also the omix ada speedometer faces are screwed down in the center right behind the needle vs the old style that is riveted outboard an inch or so on either side of the needle. I actually just attempted this last week. Also unfortunately the internals are off just enough it would be hard to mix and match pieces to make it work.
     
    vtxtasy likes this.
  5. Mar 7, 2023
    Cj5dale

    Cj5dale Member 2023 Sponsor 2022 Sponsor

    Knoxville, Tn
    Joined:
    Aug 19, 2021
    Messages:
    573
    I wonder if a vinyl wrap shop could make a vintage cover for a modern speedo?
     
    1969jeepercj5 likes this.
  6. Mar 16, 2023
    zinertia2

    zinertia2 "and which part are you keeping?" 2024 Sponsor 2023 Sponsor 2022 Sponsor

    Greencastle , IN
    Joined:
    Feb 15, 2018
    Messages:
    184
    My instrument group is much easier.
    Though the speedo has a calibration mode where once you drive a measured mile it takes into account the tire diameter and rear axle ratio for accurate MPH.
    Changed out the HB lamp and two bolt holes for blue high beam, green arrows for left or right turn, all LED indicators.
    Dennis

    83A0D051-F1D2-4702-AE58-14B1547876A8.jpeg
     
    HellaSlow, 3b a runnin, Twin2 and 2 others like this.
  7. Mar 18, 2023
    Twin2

    Twin2 not him 2024 Sponsor 2023 Sponsor 2022 Sponsor

    Virginia Beach, VA
    Joined:
    Apr 28, 2011
    Messages:
    5,407
    just so you know
    if you put any power to those gauges without a good ground
    you'll see the magic smoke . not good
     
New Posts