1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Back At It----rebuilding A Power Lok

Discussion in 'Builds and Fabricators Forum' started by Jeepsterjim, Oct 4, 2020.

  1. Oct 4, 2020
    Jeepsterjim

    Jeepsterjim Member

    Lincoln, CA
    Joined:
    Apr 25, 2019
    Messages:
    401
    Well I caught up on enough last winter, fall, and summer chores to the point that I can focus on real stuff[​IMG] once again. I'm ready to rebuild the D-44 series 3 power lok and then rebuild the front D-30 series 4 power lok next.

    Below is a picture of the cleaned up and new parts. Can I apply a thin coat of petroleum jelly on all the parts to protect it from flash rusting? It will be around two years before the 2A will be ready to drive and yes I will add LS oil.
    [​IMG]


    Jim
    CJ-2A - 81299
     
  2. Oct 4, 2020
    47v6

    47v6 junk wrecker! 2023 Sponsor 2022 Sponsor

    USA
    Joined:
    Oct 25, 2006
    Messages:
    5,798
    Why don't you just coat it all in gear oil?
     
  3. Oct 4, 2020
    Jeepsterjim

    Jeepsterjim Member

    Lincoln, CA
    Joined:
    Apr 25, 2019
    Messages:
    401
    I could, just thought the jelly would stay in place better.
     
New Posts