1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Wheel Hub Lubrication

Discussion in 'Early CJ5 and CJ6 Tech' started by tripilio, Sep 21, 2020.

Tags:
  1. Sep 21, 2020
    tripilio

    tripilio Proud American!

    Miami
    Joined:
    Aug 12, 2018
    Messages:
    930
    Question, on the wheel hubs I packed up the bearings at installation. Should I fill the extra space with more grease, or just the one on the bearings? I posted this question on my build but I think here reaches more people. That is why I am reposting. Sorry if I am breaking any rule.
     
  2. Sep 21, 2020
    scott milliner

    scott milliner Master Fabricator

    Seattle Wa.
    Joined:
    Dec 17, 2002
    Messages:
    2,361
    Only need to pack the bearings.
     
    tripilio likes this.
  3. Sep 21, 2020
    nickmil

    nickmil In mothballs.

    Happy Valley, OR
    Joined:
    Sep 23, 2002
    Messages:
    12,529
    The bearings as Scott Milliner posted but also the cavity behind the races. You want to pack the cavity just up to the level of the races, no more. This creates a reservoir of grease that will slosh around once warmed up to help feed the bearings. Otherwise the bearings can throw the grease into the cavity and run dry.
     
    Jonbbrew, Rick Whitson and tripilio like this.
  4. Sep 21, 2020
    tripilio

    tripilio Proud American!

    Miami
    Joined:
    Aug 12, 2018
    Messages:
    930
    Awesome. Thanks a lot! That was the only thing holding me back from putting together the front brakes. That and a nasty weather this past weekend, so I decided to make an effort and exterminate a few beers!
    :beer:
     
    Glenn and Rick Whitson like this.
New Posts