1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

19 Spline Ox Locker Now Availible

Discussion in 'Early CJ5 and CJ6 Tech' started by Cowboyjeeper, Jun 23, 2020.

  1. Jun 23, 2020
    Cowboyjeeper

    Cowboyjeeper Member

    Show low az
    Joined:
    Mar 5, 2019
    Messages:
    473
  2. Jun 24, 2020
    Fireball

    Fireball Well-Known Member 2024 Sponsor 2023 Sponsor 2022 Sponsor

    Pullman, WA
    Joined:
    Feb 9, 2018
    Messages:
    5,622
    You could use thick gears and put whatever ratio you want in it: Dana 44 Thick 4.10-5.38 Ratio Dual Drilled 3/8 and 7/16 Inch Fits 3.73 and Down Carrier | Revolution Gear & Axle

    I would assume a type 4 case would be coming since Roxors have moved to 5.38s, but maybe they're using thick gears too.
     
    Cowboyjeeper likes this.
  3. Jun 24, 2020
    BadGoat

    BadGoat How High Can You Climb?

    Northern Virginia
    Joined:
    Apr 27, 2017
    Messages:
    326
    Has anyone tried to put a Roxor differential in a traditional Dana 44 housing? I was looking at the stuff at Brennan's Garage and he sells a spacer to use standard D44 gears in the Roxor axle as the Roxor carrier is between a 3 and a 4. If so, I don't think this locker would fit properly in our housings without some adaptation.

    Roxor Ring Gear Spacer

    Mike
     
  4. Jun 24, 2020
    Jrobz23

    Jrobz23 Member

    Northern, WI
    Joined:
    Oct 3, 2016
    Messages:
    942
    I imagine you’ll be able to with some machine work or clever combo of shims/races. There are likely a ton of cheap carrier and 3.73 R&Ps available from Roxors.
     
  5. Jun 24, 2020
    Jay's WWII Jeeps

    Jay's WWII Jeeps Member

    Napa CA
    Joined:
    Mar 14, 2018
    Messages:
    166
    I have a Roxor 44 front diff for my project. I had a ARB 19 spline 44 installed with out issue. The housing is the same the use a funny gear set. All you have todo is throw away all of their new stuff and put the locker a gears of your choice in.
     
    Fireball, Cowboyjeeper and BadGoat like this.
  6. Jun 24, 2020
    Fireball

    Fireball Well-Known Member 2024 Sponsor 2023 Sponsor 2022 Sponsor

    Pullman, WA
    Joined:
    Feb 9, 2018
    Messages:
    5,622
    I didn't realize the Roxors have a strange spacing between a type 3 and 4. Annoying. There will for sure be some combination that works with 5.38s since that's what they are selling now.

    Of course, swapping all the guts for regular 44 stuff is always an option. If you're swapping everything out, you can also get 30 spline axles shafts and be stronger all around: 30 Spline Front Chromoly Axle Shafts - On The Rox

    I am surprised the axle kit doesn't at least come with 27 spline outers to use Dana 30 hubs. They look like 10 spline.
     
  7. Jun 24, 2020
    Jrobz23

    Jrobz23 Member

    Northern, WI
    Joined:
    Oct 3, 2016
    Messages:
    942
    Correct, I used 10 spline Warns on mine. These were actually way cheaper than the 27s on my CJ5 (NTD30).
     
  8. Jun 24, 2020
    Cowboyjeeper

    Cowboyjeeper Member

    Show low az
    Joined:
    Mar 5, 2019
    Messages:
    473
    I contacted ox they can build one
     
New Posts