1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Ball Joints

Discussion in 'Intermediate CJ-5/6/7/8' started by Allan, Mar 31, 2020.

  1. Mar 31, 2020
    Allan

    Allan 74 Renegade

    Olympia
    Joined:
    Jan 21, 2019
    Messages:
    271
    Who makes the best conventional ball joints for 1974 Jeep cj 5 304 engine, and do they need to be adjustable?
     
    Last edited: Mar 31, 2020
    Allan, Mar 31, 2020
    #1
  2. Mar 31, 2020
    45es

    45es Active Member 2024 Sponsor 2023 Sponsor 2022 Sponsor

    Naches, WA
    Joined:
    Mar 31, 2007
    Messages:
    1,106
    I like Moog. Whatever brand you choose, pay attention to where the Zirk fitting is located. On some brands, the fitting is located on the bottom of the upper ball joint and interferes with the axle and must be removed. This of course means it must be reinstalled every time you want to grease the joint.
     
    45es, Mar 31, 2020
    #2
  3. Apr 2, 2020
    MA74CJ5

    MA74CJ5 Member

    Bolton, MA
    Joined:
    Oct 28, 2004
    Messages:
    482
    Just went did these about 2 months ago. Moog seem to be the best quality but I did get a bad one which lengthened the job considerably. Also replace the axle joints while your at it. I recommend standard, greasable Spicer U-joints. They were the only ones that I could get to fit correctly. Oh and may as well do axle bearings and seals while you got it apart. How are those steering linkages and tie rods BTW? Don't you love how things just snowball? :D
     
    MA74CJ5, Apr 2, 2020
    #3
  4. Apr 2, 2020
    sterlclan

    sterlclan Member 2022 Sponsor

    exploring the...
    Joined:
    Feb 21, 2009
    Messages:
    3,883
    Don’t forget the spindle bearing while the spindle is off.
     
    sterlclan, Apr 2, 2020
    #4
New Posts