1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

3/8 Off-set Dowel Pins

Discussion in 'Early CJ5 and CJ6 Tech' started by tripilio, Feb 27, 2020.

Tags:
Page 2 of 2
  1. Mar 10, 2020
    Keys5a

    Keys5a Sponsor

    Florida Keys
    Joined:
    Jan 23, 2014
    Messages:
    4,188
    Silver brazed, as in used A/C work?
    -Donny
     
    Keys5a, Mar 10, 2020
    #21
    tripilio likes this.
  2. Mar 10, 2020
    Fireball

    Fireball Well-Known Member 2024 Sponsor 2023 Sponsor 2022 Sponsor

    Pullman, WA
    Joined:
    Feb 9, 2018
    Messages:
    5,689
    Hah!

    If the total runout is .020 is does seem like .010 is what's required to bring it back to center.
     
    Fireball, Mar 10, 2020
    #22
    tripilio likes this.
  3. Mar 10, 2020
    tripilio

    tripilio Proud American!

    Miami
    Joined:
    Aug 12, 2018
    Messages:
    930
    Yep. I jut need it to hold enough to align the bellhousing. Once is in position, I will tighten all the other bolts, drill and ream to the next size over and install a bolt I will probably turn myself. :whistle:
     
    tripilio, Mar 10, 2020
    #23
  4. Mar 10, 2020
    PeteL

    PeteL If it wasn't for physics, and law enforcement... 2024 Sponsor 2023 Sponsor 2022 Sponsor

    Hills of NH
    Joined:
    Aug 3, 2003
    Messages:
    9,806
    For .010, I'd be tempted to use stock bolts, snug them, then hit the housing upside the head with a BFH and then torque it down.
     
    Last edited: Mar 13, 2020
    PeteL, Mar 10, 2020
    #24
    tripilio likes this.
  5. Mar 11, 2020
    tripilio

    tripilio Proud American!

    Miami
    Joined:
    Aug 12, 2018
    Messages:
    930
    Might try that...:bananatool:
     
    tripilio, Mar 11, 2020
    #25
Page 2 of 2
New Posts