1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Tie Rod Ends

Discussion in 'Intermediate CJ-5/6/7/8' started by MA74CJ5, Feb 29, 2020.

  1. Feb 29, 2020
    MA74CJ5

    MA74CJ5 Member

    Bolton, MA
    Joined:
    Oct 28, 2004
    Messages:
    482
    Does anyone out there have a recommendation on which brand to choose for tie rod ends? Looking for something that is going to fit right and is at least OEM quality. It's a 74 CJ5 that will be mostly road driven - no rock crawling or mud bogging.
     
  2. Mar 1, 2020
    Keys5a

    Keys5a Sponsor

    Florida Keys
    Joined:
    Jan 23, 2014
    Messages:
    4,170
    I've always trusted Moog for OEM (or better) quality.
    -Donny
     
    Ol Fogie and OldAdobe like this.
  3. Mar 1, 2020
    jpflat2a

    jpflat2a what's that noise?

    Hermosa, SD
    Joined:
    Jul 30, 2003
    Messages:
    8,513
    What Donny said.
     
  4. Mar 1, 2020
    Lockman

    Lockman OK.....Now I Get It . 2024 Sponsor 2023 Sponsor 2022 Sponsor

    Silver Hill,...
    Joined:
    Dec 4, 2018
    Messages:
    2,698
    What Jim said , Donny said. :)
     
  5. Mar 1, 2020
    MA74CJ5

    MA74CJ5 Member

    Bolton, MA
    Joined:
    Oct 28, 2004
    Messages:
    482
    Thanks friends. Moog has been my quality go to for years and I used them for my ball joints. However, I did get a bad one - the grease boot did not seal properly and I just wanted to make sure they were still top shelf.
     
  6. Mar 1, 2020
    wally

    wally SSSSTER

    upper merrimack...
    Joined:
    Jun 12, 2005
    Messages:
    554
    i believe it depends on the application. moog might make good cj parts, but they have a less than stellar reputation for late-80s toyota truck tie rods/ball joints, etc.
     
New Posts