3b Venting Windshield Gaskets, Are They Available

I Finally found a good venting windshield for the 3B but with broken glass, I’m having glass cut to fit now.
The gasket between the fixed frame in the fold out frame is in decent shape no tears and still somewhat flexible, But I figured if it’s available somewhere I might as well replace it while it’s a part just don’t know where to look. Anyone have a idea.



There is also some little vinyl gasket that goes around the glass itself before it slides into the metal venting frame, this is not in good shape and will need something to replace it.

 

I haven't tried them yet, but Steele Products ( or some similar spelling) has almost any automotive rubber gasket profile available. I bought a NOS inner gasket on EBay about a year ago for my venting CJ5 frame, but wish I have bought his second one.
These are the same as the CJ5/M38A1 venting gasket, just shorter for the narrower CJ3 frame. I also think DeBella's Jeep parts has the gasket at around $95.
The inner seal that holds the glass in the frame is called "glass tape" and most glass shops have this material in a couple thicknesses.
-Donny

 

thanks thats the company i was looking for,

 

Pulled the windshield apart to replace the glass, the quality of the original 50+ year old seals impressive, still soft and flexible after all these years in storage, cleaned and treated them, and put them back on. Very excited for this addition to the 3B

 

So the 3B venting windshields are one-piece glass? The CJ5 venting windshields have a center divider bar/2 piece glass.
-Donny