1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Ugh!!! M-100 Or M-416 Lunette Holder Casting

Discussion in 'Jeep Trailer Tech' started by DanStew, Feb 23, 2019.

  1. Feb 23, 2019
    DanStew

    DanStew Preowned Merkin salesman Staff Member

    Lexington, South...
    Joined:
    Sep 22, 2002
    Messages:
    4,584
    SOOOOOOOO I ordered a new landing leg casting to go on my M416 trailer.
    I put it on and the casting does not reach the spring hold pin.

    So Is my casting for my trailer an M100?
    [​IMG]
    [​IMG]

    When i first bolted the tongue to the trailer i noticed the casting only had one provision for the lunette ring, where most m416s had two spots to put the lunnette. I "Assumed" it was something to do with being an M416B1 Marine trailer

    What do you think?
     
  2. Feb 23, 2019
    48cj2a

    48cj2a http://bantamt3c.com

    Central Illinois
    Joined:
    May 4, 2003
    Messages:
    526
    The M100 and M416 castings are not interchangeable.

    Trailer Parts
     
  3. Feb 24, 2019
    DanStew

    DanStew Preowned Merkin salesman Staff Member

    Lexington, South...
    Joined:
    Sep 22, 2002
    Messages:
    4,584
    Looks like the casting is an m101. i had a friend measure his and it looked to be a match. So it was changed out.
    Now to see if i can sell this pivot or trade for a m101.

    Is the pivots cast iron or cast steel? Maybe i could weld on a piece of plate to extend things.
     
New Posts