1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Dauntless To Ford T18 Clutch

Discussion in 'Early CJ5 and CJ6 Tech' started by Strider380, Nov 30, 2018.

  1. Nov 30, 2018
    Strider380

    Strider380 Can I have a zip tie?

    New England
    Joined:
    Jan 12, 2006
    Messages:
    1,117
    I swapped a ford t18 into my jeep almost ten years ago. Ive since aquired a nicer “puffed up” dauntless i am about to install. I wanted to do it tonight but i think it makes sense to replace the clutch disk and throw out bearing. Cant for the life off me remember what year ford pick up i bought this tranny out of. I would like to buy at napa but they are looking at me like i have three heads with my request. Conveniently, clutch disks dont have part numbers on them. Im at the point where im just gonna put the old stuff back in. Anyone have part numbers for a ford borg warner 10.5 “ 10 spline clutch disc and a 69 dauntless v6 throw out bearing that i can give to napa?
     
  2. Nov 30, 2018
    y2grey

    y2grey Member

    Fayetteville NY
    Joined:
    Sep 18, 2011
    Messages:
    106
    I ordered mine direct from Novak, took a day or so to get the parts.
     
  3. Dec 1, 2018
    oldtime

    oldtime oldtime

    St. Charles,...
    Joined:
    Aug 14, 2006
    Messages:
    3,466
    Bowbender likes this.
  4. Dec 2, 2018
    cj6/442

    cj6/442 Sponsor

    Fallbrook, Calif
    Joined:
    Feb 6, 2008
    Messages:
    2,734
    I am also looking at a puffed up Dauntless can you please pm me what you paid .the one Im looking at is all built never ran,cam headers and its been balanced
     
  5. Dec 2, 2018
    oldtime

    oldtime oldtime

    St. Charles,...
    Joined:
    Aug 14, 2006
    Messages:
    3,466
    Cost about $2500 to $2800 to fully rebuild build a Dauntless with 100% genuine NOS parts.
     
  6. Dec 4, 2018
    nickmil

    nickmil In mothballs.

    Happy Valley, OR
    Joined:
    Sep 23, 2002
    Messages:
    12,529
    You can buy just the 10 1/2' Ford disc...
     
New Posts