1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Trailer Connector

Discussion in 'Early CJ5 and CJ6 Tech' started by Kz400, Jan 23, 2018.

  1. Jan 23, 2018
    Kz400

    Kz400 Member

    Wheaton il
    Joined:
    Oct 31, 2017
    Messages:
    50
    Can anyone ID this connector? Its on the back of my 66 cj that was used by the air force and the fire department. [​IMG] [​IMG]
     
    Kz400, Jan 23, 2018
    #1
  2. Jan 27, 2018
    gibson-d@sbcglobal.net

    gibson-d@sbcglobal.net Member

    Houston, TX
    Joined:
    Feb 11, 2007
    Messages:
    93
    Plug socket for military trailer.
     
    gibson-d@sbcglobal.net, Jan 27, 2018
    #2
  3. Jan 28, 2018
    PeteL

    PeteL If it wasn't for physics, and law enforcement... 2024 Sponsor 2023 Sponsor 2022 Sponsor

    Hills of NH
    Joined:
    Aug 3, 2003
    Messages:
    9,806
    Appears to be from the earlier generation MB / GPW type. (4-pin)

    M38A1 era receptacle was totally different, in the time of CJs. (12-pin)

    1519Caa.jpg
     
    PeteL, Jan 28, 2018
    #3
  4. Jan 28, 2018
    NCRenII

    NCRenII yellow fever

    Far Nor Cal
    Joined:
    Sep 22, 2017
    Messages:
    431
    NCRenII, Jan 28, 2018
    #4
  5. Jan 28, 2018
    Kz400

    Kz400 Member

    Wheaton il
    Joined:
    Oct 31, 2017
    Messages:
    50
    Kz400, Jan 28, 2018
    #5
  6. Jan 30, 2018
    NCRenII

    NCRenII yellow fever

    Far Nor Cal
    Joined:
    Sep 22, 2017
    Messages:
    431
    NCRenII, Jan 30, 2018
    #6
  7. Jan 30, 2018
    Howard Eisenhauer

    Howard Eisenhauer Administrator Staff Member

    Tantallon, Nova...
    Joined:
    Nov 22, 2003
    Messages:
    8,118
    Not good for much in this day & age as there's no provision for turn signals.

    [​IMG]
     
    Howard Eisenhauer, Jan 30, 2018
    #7
    ojgrsoi likes this.
  8. Jan 30, 2018
    PeteL

    PeteL If it wasn't for physics, and law enforcement... 2024 Sponsor 2023 Sponsor 2022 Sponsor

    Hills of NH
    Joined:
    Aug 3, 2003
    Messages:
    9,806
    I would think you could re-purpose the blackout lamp wires. But wouldn't turn signals and tailights only need three wires any way?
     
    PeteL, Jan 30, 2018
    #8
  9. Jan 30, 2018
    Glenn

    Glenn Kinda grumpy old man Staff Member

    Apopka, Fl
    Joined:
    Sep 21, 2002
    Messages:
    12,375
    Exactly, unless Howard had a different idea in mind.
     
    Glenn, Jan 30, 2018
    #9
  10. Jan 31, 2018
    Howard Eisenhauer

    Howard Eisenhauer Administrator Staff Member

    Tantallon, Nova...
    Joined:
    Nov 22, 2003
    Messages:
    8,118
    Howard does not.

    But what if you need to tow something that isn't a re-wired WW2 Bantam trailer?
     
    Last edited: Jan 31, 2018
    Howard Eisenhauer, Jan 31, 2018
    #10
  11. Jan 31, 2018
    PeteL

    PeteL If it wasn't for physics, and law enforcement... 2024 Sponsor 2023 Sponsor 2022 Sponsor

    Hills of NH
    Joined:
    Aug 3, 2003
    Messages:
    9,806
    Make a double-doodle adaptor. Or wye off a pigtail from the harness with a conventional connector.

    But, yeah, I would swap it out. It's not appropriate for the Jeep's year anyway.
     
    Last edited: Jan 31, 2018
    PeteL, Jan 31, 2018
    #11
  12. Jan 31, 2018
    Glenn

    Glenn Kinda grumpy old man Staff Member

    Apopka, Fl
    Joined:
    Sep 21, 2002
    Messages:
    12,375
    Are there wires hooked to the socket? If so have you tested any connections?
     
    Glenn, Jan 31, 2018
    #12
  13. Jan 31, 2018
    Kz400

    Kz400 Member

    Wheaton il
    Joined:
    Oct 31, 2017
    Messages:
    50
    It wasent hooked up when i got it. It had a round 4 pin, extra lights and wires everywhere that were somewhat attached. I'm in the process of welding up all the extra holes now. And just trying to figure out what srays and what goes.
     
    Kz400, Jan 31, 2018
    #13
New Posts