1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Buying A 1976 Cj5, What To Look Out For

Discussion in 'Intermediate CJ-5/6/7/8' started by stephlaw084, Oct 22, 2017.

Tags:
  1. Oct 22, 2017
    stephlaw084

    stephlaw084 New Member

    Chula Vista
    Joined:
    Oct 22, 2017
    Messages:
    5
    I found a thread from 2007 that was super helpful so I thought I would join and ask my questions. I have always loved CJ5 and got bit by the desert bug years ago. I finally have the opportunity to purchase what is being labeled as a frame up restoration 1976 cj5. 304 v8, rebuilt with crane cam, edelbrook manifold and carburetor, hooker headers, new wiring, suspension, interior etc. I've asked for axel info and vin (still pending). Currently asking 7k, good price? Anything I need to look out for? I'm handy at repairing, tinkering really, haven't done anything major. Thanks in advance.
     

    Attached Files:

  2. Oct 22, 2017
    rusty

    rusty Well-Known Member

    norfolk,va
    Joined:
    Dec 16, 2006
    Messages:
    1,652
    Is that a glass body ? Need better pictures to be able help much. Just remember that a 76 is much different than a 75 and down.
     
  3. Oct 22, 2017
    wally

    wally SSSSTER

    upper merrimack...
    Joined:
    Jun 12, 2005
    Messages:
    554
    looks like a 'glass body, fenders, and windshield frame.

    also, if that picture illustrates the current condition of the jeep, then $7k is too much, no matter where in the US it is.
     
  4. Oct 22, 2017
    PeteL

    PeteL If it wasn't for physics, and law enforcement... 2024 Sponsor 2023 Sponsor 2022 Sponsor

    Hills of NH
    Joined:
    Aug 3, 2003
    Messages:
    9,754
    That approach may be many other things, but it is not "restoration."
     
  5. Oct 22, 2017
    stephlaw084

    stephlaw084 New Member

    Chula Vista
    Joined:
    Oct 22, 2017
    Messages:
    5
    Hmmm that's what I was concerned about the supposed "restoration". I'm planning on looking at it tomorrow. Any specific questions I should ask?
     
  6. Oct 22, 2017
    stephlaw084

    stephlaw084 New Member

    Chula Vista
    Joined:
    Oct 22, 2017
    Messages:
    5
    Guy stated he put 12k in it... However, no matter how much you polish a turd... Still a turd. That being said, what would be a "reasonble" ballpark figure.
     
  7. Oct 22, 2017
    stephlaw084

    stephlaw084 New Member

    Chula Vista
    Joined:
    Oct 22, 2017
    Messages:
    5
     

    Attached Files:

  8. Oct 23, 2017
    wally

    wally SSSSTER

    upper merrimack...
    Joined:
    Jun 12, 2005
    Messages:
    554
    it isn't in completed condition if the pictures are an accurate representation (dash is not attached, seats are not completely installed, windshield is missing parts, etc) . therefore, it is still a bunch of parts, which might be in very good condition, even excellent. but, if it isn't driveable, and you cannot verify the operating condition of all electrical/gauges, driveline, brakes, cooling system, etc, i'd reasonably expect to sell it for $1500 to $3000. that's it. otherwise, as a seller, if you want more, finish it and then get more.
     
    stephlaw084 likes this.
  9. Oct 23, 2017
    timgr

    timgr We stand on the shoulders of giants. 2022 Sponsor

    Medford Mass USA
    Joined:
    Aug 10, 2003
    Messages:
    23,596
    Very true ... incomplete projects typically sell for a small fraction of what the completed car would sell for. If the seller wants to make back as much as possible, he's going to have to part it out and sell the pieces individually. If he just wants to get out, he'll take a bath on the "investment." :coffee::whistle:

    Not so much of a problem in CA, but these Jeeps suffer badly from frame rot. A 'glass body is suspicious, since you should not need a body replacement for a Jeep that originates in CA. Carefully inspect the underside for repairs and rust.
     
    stephlaw084 likes this.
  10. Oct 23, 2017
    stephlaw084

    stephlaw084 New Member

    Chula Vista
    Joined:
    Oct 22, 2017
    Messages:
    5
    I believe it's completed & driveable. That is one a few photos of it available. Thanks for all the help. I'll ask about glass body and do a complete inspection underneath. If this isn't the one I buy, this is certainly a wealth of knowledge and I appreciate all the assistance.
     
  11. Nov 1, 2017
    fhoehle

    fhoehle Sponsor

    Harford Township, PA
    Joined:
    Apr 11, 2012
    Messages:
    1,427
    In our neck of the woods that is a 3500 dollar Jeep. That's if it is driveable and useable and has a top
     
  12. Nov 1, 2017
    pat w

    pat w Member

    washougal wa
    Joined:
    Dec 25, 2015
    Messages:
    107
    It has a boxed frame take a good light and look inside especially near the very ends. They rust from the inside out
     
  13. Nov 1, 2017
    sterlclan

    sterlclan Member 2022 Sponsor

    exploring the...
    Joined:
    Feb 21, 2009
    Messages:
    3,869
    The transmission cross member mounts are another bad spot.
     
  14. Nov 2, 2017
    HurricaneKustoms

    HurricaneKustoms New Member

    Kill Devil Hills
    Joined:
    Sep 27, 2017
    Messages:
    20
    The biggest thing to look for is problems or issues that you can not fix or repair yourself . Anything you have to sub out is more cash out of your pocket .
    Every Heep is different and every time I thing I have seen or found all the problems , another seems to show up . My latest project has been a lesson on patience.
     
New Posts