1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Help Id'ing This PTO

Discussion in 'Early CJ5 and CJ6 Tech' started by GeoffreyL, Oct 30, 2017.

  1. Oct 30, 2017
    GeoffreyL

    GeoffreyL Well-Known Member

    moorestown, nj
    Joined:
    Aug 1, 2012
    Messages:
    1,521
  2. Oct 30, 2017
    mayday

    mayday Sponsor

    Joined:
    Apr 20, 2013
    Messages:
    222
    GeoffreyL likes this.
  3. Oct 30, 2017
    PeteL

    PeteL If it wasn't for physics, and law enforcement... 2024 Sponsor 2023 Sponsor 2022 Sponsor

    Hills of NH
    Joined:
    Aug 3, 2003
    Messages:
    9,754
    Koenig does use "WO" parts numbers… And I show a "J50-202 rear housing" in one of my catalogs. Maybe yours is a variant.

    CJ versus truck/wagon differ in clocking…one is angled lower, one is angled higher, as determined by the mounting holes to the transfer.
     
    Last edited: Oct 30, 2017
  4. Oct 30, 2017
    Howard Eisenhauer

    Howard Eisenhauer Administrator Staff Member

    Tantallon, Nova...
    Joined:
    Nov 22, 2003
    Messages:
    8,102
    The CJ ones drop lower, the notch in this indicates it comes up close to the frame for a truck.
     
  5. Oct 30, 2017
    Glenn

    Glenn Kinda grumpy old man Staff Member

    Apopka, Fl
    Joined:
    Sep 21, 2002
    Messages:
    12,367
    Shows 201 on front side and 202 on back side? Is that correct?
     
  6. Oct 30, 2017
    PeteL

    PeteL If it wasn't for physics, and law enforcement... 2024 Sponsor 2023 Sponsor 2022 Sponsor

    Hills of NH
    Joined:
    Aug 3, 2003
    Messages:
    9,754
    Thanks. I couldn't recall, although I've installed both.
     
New Posts