1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

1/3 2/3 Bench Seat Or 60/40

Discussion in 'Early Jeep Restoration and Research' started by Mopar_tim, Jul 16, 2016.

Page 2 of 2
  1. Jul 26, 2016
    Glenn

    Glenn Kinda grumpy old man Staff Member

    Apopka, Fl
    Joined:
    Sep 21, 2002
    Messages:
    12,375
    Do the seat backs on your seats fold?
     
    Glenn, Jul 26, 2016
    #21
  2. Jul 26, 2016
    Mopar_tim

    Mopar_tim New Member

    Joined:
    May 29, 2016
    Messages:
    23
    Not the driver side, the passenger side folds and then tilts to get to the tool box
     
    Mopar_tim, Jul 26, 2016
    #22
  3. Jul 26, 2016
    Glenn

    Glenn Kinda grumpy old man Staff Member

    Apopka, Fl
    Joined:
    Sep 21, 2002
    Messages:
    12,375
    As mentioned by Mayday, making a jump seat is worth thinking about. If you make one with a folding back that would be better yet. An upholstery shop could make you a seat cushion that would fit snug and the same with the back, plus you wouldn't have to mess with the original bucket seat.
     
    Glenn, Jul 26, 2016
    #23
  4. Jul 26, 2016
    mayday

    mayday Sponsor

    Joined:
    Apr 20, 2013
    Messages:
    222
    mayday, Jul 26, 2016
    #24
  5. Jul 29, 2016
    Chris Insull

    Chris Insull All roads lead me back to the beach... 2023 Sponsor 2022 Sponsor

    Chesapeake, VA.
    Joined:
    Sep 22, 2002
    Messages:
    805
    Some of them do. The set I have stored in my shop permits folding of the passenger and driver seat backs. Only the passenger seat permits the entire seat to fold forward for entry to the back seat.
     
    Chris Insull, Jul 29, 2016
    #25
  6. Jul 29, 2016
    jeepermc

    jeepermc Active Member

    Western WA
    Joined:
    May 25, 2011
    Messages:
    1,191
    The back of my 2/3 folds and the 1/3 folds and tumbles.
     
    jeepermc, Jul 29, 2016
    #26
Page 2 of 2
New Posts