1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Whats the measurement between the spring pad locating pins on a Intermediate Dana 44?

Discussion in 'Intermediate CJ-5/6/7/8' started by dsrt4, Dec 17, 2014.

  1. Dec 17, 2014
    dsrt4

    dsrt4 Member

    Joined:
    Oct 30, 2009
    Messages:
    555
    For some reason I remember it being 27 1/4 from mounting hole to hole... Is that correct? I have a amc 20 I need to put some new perches on and throw it under my 73.

    Amc 20 is built with truss 1 piece axles and lunchbox locker.

    Wish I would have kept my dana 44 but I scrapped them when I did the 1 ton stuff.
     
    dsrt4, Dec 17, 2014
    #1
  2. Dec 17, 2014
    Im a doughball

    Im a doughball Member

    Oregon City
    Joined:
    Jan 8, 2011
    Messages:
    207
    Re: Whats the measurement between the spring pad locating pins on a Intermediate Dana

    27.5"
     
    Im a doughball, Dec 17, 2014
    #2
  3. Dec 17, 2014
    dsrt4

    dsrt4 Member

    Joined:
    Oct 30, 2009
    Messages:
    555
    Re: Whats the measurement between the spring pad locating pins on a Intermediate Dana

    Well at least I was close!

    Thanks for the help.
     
    dsrt4, Dec 17, 2014
    #3
New Posts