1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Hi-Lift Jack Mounting

Discussion in 'Early CJ5 and CJ6 Tech' started by Parkhurst, Oct 31, 2013.

  1. Nov 5, 2013
    grannyscj

    grannyscj Headed to the Yukon

    Anchorage, AK
    Joined:
    Dec 19, 2005
    Messages:
    1,758
    If you want to mount it to the roll bar, use muffler clamps as suggested.
    [​IMG]
    It makes a nice out of the way mount.
    [​IMG]
     
  2. Nov 5, 2013
    supertrooper

    supertrooper Member

    moreno valley, ca
    Joined:
    Nov 12, 2007
    Messages:
    742
    I made a mount out of some scrap angle and a few bolts. It puts the jack just above the tailgate. I also added a cb antenna mounting tab.
     
  3. Nov 5, 2013
    DanStew

    DanStew Preowned Merkin salesman Staff Member

    Lexington, South...
    Joined:
    Sep 22, 2002
    Messages:
    4,585
    Here is mine.

    [​IMG]
     
  4. Nov 6, 2013
    PeteL

    PeteL If it wasn't for physics, and law enforcement... 2024 Sponsor 2023 Sponsor 2022 Sponsor

    Hills of NH
    Joined:
    Aug 3, 2003
    Messages:
    9,754

    Dang, you folks must run in some pretty wide open country, to carry that kind of height. Wouldn't last a day here in NH.

    I won't even use a roll bar, so as I can sneak under fallen trees, low branches, bar-gates, etc.
     
    Last edited: Nov 6, 2013
  5. Nov 6, 2013
    68BuickV6

    68BuickV6 Well-Known Member

    Hesperia, CA.
    Joined:
    Mar 12, 2012
    Messages:
    2,160

    The lowest tree I've ever encountered in forested stuff (Big Bear for example) just brushed my roll bar and windshield. You couldn't pay me to run without a roll bar or cage, to much can happen even on a fire road.

    Now narrow trails are another story... :twisted:
     
New Posts