1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Where can I find body mounts for 74 CJ5 ?

Discussion in 'Intermediate CJ-5/6/7/8' started by Logic2, May 14, 2013.

  1. May 14, 2013
    Logic2

    Logic2 New Member

    Joined:
    Apr 29, 2013
    Messages:
    13
    I am trying to find a source for body mounts for my 74 CJ5.
    ---> These are the metal tabs mounted to the body tub that connect to the frame mounts with a rubber bushing in between.

    My restoration is about 95% complete and this is all that;s holding me up.
    The FRAME mounts are all good, but many of the body mounts are either missing or rusted.

    Who sells the body mounts ?

    Thanks in advance.

    Mike@Logic2.com
     
  2. May 14, 2013
    2manytoys

    2manytoys Member

    minnesota
    Joined:
    Mar 28, 2007
    Messages:
    282
    Classic ent. Has the tub mount for the rear of the tub. Is that what you need? Or are your talking about the rubber bushings? Got mine at 4wd.com.
     
  3. May 14, 2013
    nickmil

    nickmil In mothballs.

    Happy Valley, OR
    Joined:
    Sep 23, 2002
    Messages:
    12,529
    The body insulators go between the hat channels and frame mounts except on the rear of the tub where there are sheet metal angled mounts as part of the tub. Not quite sure what you are looking for. Can you post a pic if what you are talking about?


    Sent from my iPhone
     
  4. May 15, 2013
    nwedgar

    nwedgar Now with TBI!

    Newnan, Georgia
    Joined:
    Oct 26, 2005
    Messages:
    1,785
  5. May 15, 2013
    Logic2

    Logic2 New Member

    Joined:
    Apr 29, 2013
    Messages:
    13
    I'll have to send photos when I get home, but I do (NOT) need the rubber insulators, I need the piece of metal that is welded to the body tub that the insulator sits under.

    Thank you for the reply.
    Mike
     
  6. May 15, 2013
    timgr

    timgr We stand on the shoulders of giants. 2022 Sponsor

    Medford Mass USA
    Joined:
    Aug 10, 2003
    Messages:
    23,596
    If CE does not sell them separately, you'll have to make them. For some of them, you can substitute thin wall rectangular steel tubing cut to the right length.

    Pictures of what you need will help.
     
  7. May 17, 2013
    sterlclan

    sterlclan Member 2022 Sponsor

    exploring the...
    Joined:
    Feb 21, 2009
    Messages:
    3,885
    [​IMG] look like theese? image from classic ent.
     
New Posts