1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Power steering issu

Discussion in 'Intermediate CJ-5/6/7/8' started by johneyboy03, Jan 17, 2013.

  1. Jan 17, 2013
    johneyboy03

    johneyboy03 The green beast

    Quebec, Canada
    Joined:
    Jan 15, 2011
    Messages:
    2,115
    hi guy's i've been fighting this problem for a long time but now i don't know what to do. Last week-end i had to dissemble the front body and i dissenble both hoze that goes between steering box and P/s pump. Everything was working fine before dissemble. So after i put everything back on the jeep i did the Psc bleeding procedure couple of time without getting better. Here's what i don't understand. I have a hard steering but became smooth when engine rpm is around 2000-2500 rpm. At cold (first start in the morning) the steering is smooth too but after couple of turn is starting to get harder. Also when engine is at 2000-2500 rpm the pump is very noisy but steering is smooth...

    I have a cooler installed couple month ago for the power steering.

    Any idea what is the problem.
     
  2. Jan 17, 2013
    tarry99

    tarry99 Member

    Northern California
    Joined:
    Oct 29, 2012
    Messages:
    3,784
    Perhaps you still have some air in the system............or your Pump may be going Out?
     
  3. Jan 17, 2013
    johneyboy03

    johneyboy03 The green beast

    Quebec, Canada
    Joined:
    Jan 15, 2011
    Messages:
    2,115
    Hum the weird thing, when i don't use the jeep for couple of hour, for the 3-4 first minute i have lot of power on the steering but after that it decresing and i need to give more rev to the engine to turn the wheel.
     
  4. Jan 17, 2013
    tarry99

    tarry99 Member

    Northern California
    Joined:
    Oct 29, 2012
    Messages:
    3,784
    :)Next time your out take a look at the oil Cold.............then in 3-4 minutes and see if it's foamed up? The pump may be cavitating the oil ( getting air from somewhere) and causing that issue. Air will compress but not at the same density as oil.........check your non-pressure return line and make sure there is nothing loose or broken where air can enter.:D
     
  5. Jan 17, 2013
    johneyboy03

    johneyboy03 The green beast

    Quebec, Canada
    Joined:
    Jan 15, 2011
    Messages:
    2,115
    For the moment i did a complete flush....oil was black. I need to wait for the air to go out of the system now. Tomorow i'll double check for loose connection and i"ll do what you suggest me about cavitation.

    Thank's for helping
     
  6. Jan 17, 2013
    bigjohn

    bigjohn Active Member

    Kelso Wa
    Joined:
    Mar 18, 2010
    Messages:
    1,054
    As far as bleeding goes, remove the steering linkage from the pitman arm and then bleed it. If the knuckles are hitting the turn stops then you are not getting the complete range of motion from the gear and may not be completely bleeding.

    If you already did this then disregard;)
     
  7. Jan 18, 2013
    johneyboy03

    johneyboy03 The green beast

    Quebec, Canada
    Joined:
    Jan 15, 2011
    Messages:
    2,115
    No i didn't do it yet....i try it tonight but i still need to wait to tomorow because i can cleary see cavitation because i drove it to my father shop.
     
  8. Jan 21, 2013
    johneyboy03

    johneyboy03 The green beast

    Quebec, Canada
    Joined:
    Jan 15, 2011
    Messages:
    2,115
    New pump on is way, i hope it will solve my problem!!!
     
  9. Jan 23, 2013
    johneyboy03

    johneyboy03 The green beast

    Quebec, Canada
    Joined:
    Jan 15, 2011
    Messages:
    2,115
    New pump is on the jeep, seem to have solve the problem...but didn't take a ride is about -40 degree out here
     
  10. Jan 23, 2013
    roadhog304

    roadhog304 Member

    Leon Kansas
    Joined:
    Dec 25, 2007
    Messages:
    291
    Burrrr! That is cold. You must have a well heated shop.
     
  11. Jan 24, 2013
    johneyboy03

    johneyboy03 The green beast

    Quebec, Canada
    Joined:
    Jan 15, 2011
    Messages:
    2,115
    This mornig was worst than yesterday, my chevy cavalier 2004 batterie's dead, my cj5 1975 with amc 360 starter in 3 second!!!
     
  12. Jan 24, 2013
    sterlclan

    sterlclan Member 2022 Sponsor

    exploring the...
    Joined:
    Feb 21, 2009
    Messages:
    3,869
    - 20 here didnt top single digits all day the jeeps started fine the late model injected other brands did not...
     
  13. Jan 29, 2013
    brian mcdonald

    brian mcdonald New Member

    Idaho
    Joined:
    Jan 3, 2007
    Messages:
    11
    It got -18 here, the jeep :v6: started fine and got me around, nothing else would, Nice choice on the color of your jeep!
     
  14. Jan 29, 2013
    johneyboy03

    johneyboy03 The green beast

    Quebec, Canada
    Joined:
    Jan 15, 2011
    Messages:
    2,115
    Ahah yeah, i didn't chose the color it came this way when i bought it, but i really love the color. Did you see the 2012 jeep Jk is having a similar color.
     
  15. Jan 30, 2013
    brian mcdonald

    brian mcdonald New Member

    Idaho
    Joined:
    Jan 3, 2007
    Messages:
    11
    Yes I did, I thought it was pretty interesting, I painted this 0ne in 2006, there is one JK here in town I'll have to check the paint code on it to see if it's the same color, it looks close, I painted this one 1970 Hemi Cuda sublime green.
     
  16. Sep 17, 2013
    johneyboy03

    johneyboy03 The green beast

    Quebec, Canada
    Joined:
    Jan 15, 2011
    Messages:
    2,115
    Ok problem is back, and i realy don't know what the problem is.

    I was starting to lose force on power-steering before i swap out the new frame. So i was having the same problem as before...loosing power and finally having no more.

    My big concern now, i may not have problem with the pump, i change 3 in four mounths. So with the new frame i was swapping the steering box for a scout one. When i put everything together i keep the pump that was supposed to be worn out, and everything work fine after couple bleeding. So i did about 4-5 ride without problem.

    So last week end i had trouble with the return hoze, it started to leak and by the time i found the leak i was loosing all my power-steering force,i changed the hoze, try to bleed everything with the tire off the ground and i have no force at all. When i give throttle to make the pump run faster it's start to whine loud, even more when i try to turn the wheel.

    Anybody have any idea?

    I started looking for ram assist but there's must be something i don't understand here.
     
  17. Sep 17, 2013
    tarry99

    tarry99 Member

    Northern California
    Joined:
    Oct 29, 2012
    Messages:
    3,784

    How old is the Steering Gear?.............Saginaw? The system is pretty simple.......if the pump works and the gear does not change out the gear.........sounds like the gear might have an internal issue , among the seals and bypass valving where by it is bypassing fluid to the return side prior to any work being done and then pressurizing your return line which should be under very little pressure back to the tank.............make sure you flush the system if you replace.
     
  18. Sep 17, 2013
    johneyboy03

    johneyboy03 The green beast

    Quebec, Canada
    Joined:
    Jan 15, 2011
    Messages:
    2,115
    Saginaw pump on the jeep, saginaw gearbor from a scout 2, everything was working fine until my return hoze start leaking, i change the return hoze and did the bleeding procedure and there is no force.
    Pump is 4 month old
    Steering box has 3000 miles on it since last rebuilt.

    I reed somewhere that the pressure relief valve could get stuck if there air trap in the pump, causing the pump to not being able to build pressure. I try to check that tonight.
     
    Last edited: Sep 17, 2013
  19. Sep 17, 2013
    duffer

    duffer Rodent Power

    Bozeman, MT
    Joined:
    Sep 17, 2009
    Messages:
    4,460
    Do you have an IR temp gage? Be interesting to see what temps you get at the pump. Your previous comment about black fluid sugests that pump was running way to hot and you may have gotten some debris in the system which lead to more problems. Adding a remote spin-on hydraulic filter to the return line may be a good investment. That also adds about a quart of fluid to the system which helps reduce temps.
     
New Posts