1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

T90 clutch disk alighnment tool?

Discussion in 'Early CJ5 and CJ6 Tech' started by 1957Willys, Sep 29, 2012.

  1. Sep 29, 2012
    1957Willys

    1957Willys Member

    Birmingham, Alabama
    Joined:
    Mar 23, 2012
    Messages:
    698
    Where can I find a clutch disk alighnment tool for the T90 transmission in my 57 CJ5? I would like to find on that is made to fit the clutch disk not a universal one from NAPA or Advance.
     
    1957Willys, Sep 29, 2012
    #1
  2. Sep 29, 2012
    WorkInProgress

    WorkInProgress Member

    Kennewick, Wa
    Joined:
    Jul 15, 2012
    Messages:
    967
    WorkInProgress, Sep 29, 2012
    #2
  3. Sep 29, 2012
    Stout

    Stout Member

    Quakertown, PA
    Joined:
    Nov 1, 2010
    Messages:
    958
    I have that exact one from NAPA. It is difficult to make work because the shaft diameter of your clutch is much smaller than most other clutches. I've only seen one exact tool advertised on the web: http://www.willysjeepparts.com/Clutch_Alignment_Tools.htm

    Actually, a spare transmission input shaft is the best thing to use if you happen to have one laying around.
     
    Stout, Sep 29, 2012
    #3
  4. Sep 29, 2012
    EricM

    EricM Active Member

    Southern California
    Joined:
    Dec 19, 2007
    Messages:
    1,019
    x2
     
    EricM, Sep 29, 2012
    #4
  5. Sep 30, 2012
    Howard Eisenhauer

    Howard Eisenhauer Administrator Staff Member

    Tantallon, Nova...
    Joined:
    Nov 22, 2003
    Messages:
    8,124
    x3
     
    Howard Eisenhauer, Sep 30, 2012
    #5
  6. Sep 30, 2012
    johnsotd

    johnsotd Member

    Senatobia, MS
    Joined:
    Apr 23, 2006
    Messages:
    454
    If you are replacing the clutch there may be one included with the kit. My clutch had the alignment tool with it.
     
    johnsotd, Sep 30, 2012
    #6
  7. Sep 30, 2012
    WorkInProgress

    WorkInProgress Member

    Kennewick, Wa
    Joined:
    Jul 15, 2012
    Messages:
    967
    hopefully it would include the tool but the one i bought from vintagejeepparts.com did not come with the tool.
     
    WorkInProgress, Sep 30, 2012
    #7
  8. Sep 30, 2012
    Stout

    Stout Member

    Quakertown, PA
    Joined:
    Nov 1, 2010
    Messages:
    958
    My kit did not come with a tool, either.
     
    Stout, Sep 30, 2012
    #8
New Posts