1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Recent Activity

Activity stream for all registered members at ECJ5.

  1. wheelie replied to the thread Logan 922 Lathe.

    Looks nice JW. Thanks for the lead on the Logan parts. The one I looked at doesn't come with nearly as many extras as I thought. Has...

    Apr 20, 2024 at 5:09 AM

  2. wheelie liked FinoCJ's post in the thread Logan 922 Lathe.

    Skip the lathe ...finish the B....:rofl:

    Apr 20, 2024 at 4:50 AM

  3. Ol Fogie liked Rozcoking23's post in the thread Fan Blade Question.

    Today was 81* out. Ran down freeway Between 60-70 mph temp was at 190* [ATTACH] pulled off the freeway and stopped at bottom of off...

    IMG_3402.jpg IMG_3403.jpg Apr 20, 2024 at 3:57 AM

  4. Ol Fogie liked Rozcoking23's post in the thread Fan Blade Question.

    I was reading this thread and bought #J5357390. It will need the holes slotted about 1/8”....

    Apr 20, 2024 at 3:53 AM

  5. Ol Fogie liked Jw60's post in the thread Fan Blade Question.

    Don't put the thermostat directly into the boiling water, heat the thermostat and watch the temp at which it opens. You don't want to...

    Apr 20, 2024 at 3:53 AM

  6. Ol Fogie liked supertrooper's post in the thread Fan Blade Question.

    "It runs@ 180*-185* running down the road in 100* weather. Once I slow down for in town driving it will kick up to 190*-200*, all...

    Apr 20, 2024 at 3:52 AM

  7. Ol Fogie liked duffer's post in the thread Fan Blade Question.

    The fan and shroud are clearly the most important items here. If you have a well fit shroud that doesn't allow air leaks between it and...

    Apr 20, 2024 at 3:51 AM

  8. Ol Fogie liked Rozcoking23's post in the thread Fan Blade Question.

    Since I already have the 5-blade, I’m hoping that the 7- blade will make a difference. I’m also going to try running the shroud again.

    Apr 20, 2024 at 3:50 AM

  9. Ol Fogie liked Rozcoking23's post in the thread Fan Blade Question.

    . 20 minutes idoling in drive way about 72* out [ATTACH]

    IMG_3411.jpg Apr 20, 2024 at 3:37 AM

  10. Ol Fogie liked Rozcoking23's post in the thread Fan Blade Question.

    Played with the JEEP today. [ATTACH] This was at an idol with no shroud. It’s drawing air through the radiator pretty good. [ATTACH]...

    IMG_3409.jpg IMG_3408.jpg Apr 20, 2024 at 3:37 AM

  11. Ol Fogie liked 53A1's post in the thread Fan Blade Question.

    This brings back nightmares. For a couple years I fought with overheating just as you describe. My solution was to move the trans cooler...

    Apr 20, 2024 at 3:35 AM

  12. Ol Fogie liked Bob's post in the thread Fan Blade Question.

    Like the others have mentioned, a well fitted shroud can make a big difference. I ran without a shroud for years because I didn't have...

    Apr 20, 2024 at 3:31 AM

  13. Ol Fogie liked Rozcoking23's post in the thread Fan Blade Question.

    John, I have always wondered how much that shroud is doing with the bottom open. I went to the parts store today and picked up items...

    Apr 20, 2024 at 3:21 AM
Show older items
Loading...
New Posts